Ventilation Duct

Observance of air flows in the ventilation duct is of utmost importance for the function of the ventilation and air conditioning system. If the air flows are smaller than intended, the removal of room loads (heating, cooling and substance loads) may not be ensured in certain circumstances. Therefore, the most accurate recording of air flows as possible is particularly important.

17 products or recommendations for Ventilation Duct
  • testo 405i - Hot-wire anemometer wireless Smart Probe

    Order-Nr. 0560 1405

    The testo 405i Smart Probe is a wireless instrument for measuring air flow velocity, temperature, and volume flow.  It is equipped with a telescopic shaft, which extends to 15” for easy in-duct testing.  You can reliably determine timed and multipoint flow traverses.

    • Measures air velocity, volume flow, and temperature

    • Measures in-duct air flow, and automatically calculates volume flow (simply enter the duct dimensions)

    • Small diameter (<0.5”) and 15” telescopic shaft length is ideal for in-duct flow averaging and timed traverse

    • Perform air duct leakage tests

  • testo 425 - Hot wire anemometer

    Order-Nr. 0560 4251

    The testo 425 hot wire anemometer can measure cubic feet per minute (CFM) when conducting duct testing, as well as easily switch between flow and temperature readings. The telescoping handle of the thermal probe on this CFM meter makes it easy to reach ductwork above your head.

    • Telescoping hot wire probe

    • Measures velocity, volume flow (CFM), and temperature

    • Timed and multi-point average flow calculations

    • Auto-off function saves battery life

  • testo 435-2 - Multifunction meter w/ memory and software

    Order-Nr. 0563 4352

    The testo 435-2 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-2.

    • Built-in memory stores up to 10,000 measurements

    • Optional wireless (RF) temperature and humidity probes for remote measurement

    • Backlit LCD for easy viewing

    • Optional printer allows for easy documenting of measured data

  • testo 435-3 - Multifunction meter w/ integrated differential pressure

    Order-Nr. 0560 4353

    The testo 435-3 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot airflow problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-3.

    • Integrated differential pressure measurements for flow velocity

    • Optional wireless (RF) temperature probes for remote measurement

    • Backlit LCD for easy viewing

    • Optional printer allows for easy documenting of measured data

  • testo 416 - Small vane anemometer

    Order-Nr. 0560 4160

    The testo 416 small vane anemometer (air flow meter) accurately and easily measures air velocity and volume flow (CFM) for in-duct and a variety of HVAC applications above 120 fpm. As vane technology is inherently air density independent, the testo 416 handheld digital vane anemometer provides repeatable and reliable readings test after test.

    • Small (0.63 inch) vane for in-duct measurement

    • Direct display of volume flow (CFM)

    • Multi-point and timed average calculations make fast and simple work of duct traverses

    • Bright backlit display provides easy viewing in any environment

  • testo 405 - Pocket-sized thermal anemometer

    Order-Nr. 0560 4053

    Use the testo 405 thermal anemometer to measure air velocity, volumetric flow, and air temperature. It is suitable for carrying out quick check measurements in ventilation ducts, and for measuring the air velocity in rooms, such as at drafty windows.

    • Volume flow calculation of up to 99,990 m3/h

    • Easily read data at any angle with rotating display

    • Telescopic handle up to 300 mm

    • Ideal for measurements in ducts

  • testo 480 - Digital temperature and humidity meter

    Order-Nr. 0563 4800

    Air flow measurements in ventilation ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms – the testo 480 temperature and humidity meter comes with a wide range of optional sensors that allow you to measure, analyze, and log these and a variety of other parameters with only one device.

    • High quality optional sensors for measuring air flow / temperature / humidity / pressure / degree of turbulence / heat radiation / CO2 / illumination intensity / PMV / PPD / WBGT

    • High precision, integrated pressure difference sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 512 - Pressure and flow velocity measuring instrument 0 to 2 hPa

    Order-Nr. 0560 5126

    The testo 512 differential pressure meter is available in 4 different models. This model has a measuring range of 0 to 0.80 inH2O (0 to 2 hPa), and is ideal for measuring pressure differences at filters, and for carrying out pitot static tube measurements in air ducts at air flow speeds between 2 and 17.5 m/s.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mmH2O, mmHg, inH2O, inHg

    • 2 air flow units to select from: fpm, m/s

    • Integrated density compensation

    • Backlit display / min and max values / hold function

  • testo 512 - Pressure and flow velocity measuring instrument 0 to 200 hPa

    Order-Nr. 0560 5128

    The testo 512 differential pressure meter is available in four different models. This model has a measuring range of 0 to 200 hPa, and is ideal for measuring pressure differences at filters, and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mmH2O, mmHg, inH2O, inHg

    • 2 air flow units to select from: fpm, m/s

    • Integrated density compensation

    • Backlit display / min and max values / hold function

  • testo 512 - Differential pressure meter

    Order-Nr. 0560 5127

    The testo 512 differential pressure meter is available in four models. This model has a measuring range of 0 to 0.29 psi, and is ideal for measuring pressure differences at filters, and for carrying out pitot static tube measurements in air ducts at air flow speeds between 16 and 180 fps.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mmH2O, mmHg, inH2O, inHg

    • 2 air flow units to select from: fpm, m/s

    • Integrated density compensation

    • Backlit display / min and max values / hold function

  • testo 521-2 - Differential pressure measuring instrument 0 to 100 hPa (accuracy ±0.1% of f.v.)

    Order-Nr. 0560 5211

    The high precision testo 521-2 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for pressure drop on filters, for instance, checking fans and extractors, or for pitot tube measurements.

    • Integrated differential pressure sensor with an accuracy of 0.1% of f.v.

    • Calculation of flow velocity and volume flow via pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes

  • testo 521-3 - Differential pressure measuring instrument 0 to 2.5 hPa

    Order-Nr. 0560 5213

    The testo 521-3 high precision differential pressure measuring instrument easily determines even the smallest differential pressures (up to +2.5 hPa). Its high accuracy and a resolution of 0.1 Pa make the instrument ideal for differential pressure measurements, in clean rooms, or for flue inspections.

    • Integrated temperature-compensated differential pressure sensor with accuracy of up to ± 0.5 Pa

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Direct zeroing of the display values of pressure probes

    • 2 probe inputs for additional pressure and temperature probes
       

  • testo 521-1 - Differential pressure measuring instrument 0 to 100 hPa (accuracy ±0.2% of f.v.)

    Order-Nr. 0560 5210

    The high precision testo 521-1 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for pressure drop on filters, for instance, for checking fans and extractors, or for pitot tube measurements.

    • Integrated differential pressure sensor with an accuracy of 0.2 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes

  • testo 510 - Digital manometer

    Order-Nr. 0563 0510

    With the testo 510, performing system tests has never been easier using our single, easy to use, rugged, compact digital manometer. Its small form factor, bright backlit display, and magnetic backing will enable the 510 to be used in a wide variety of applications.

    • Temperature and air density compensation for accurate airflow measurements

    • Measures differential pressure to 40 in. H2O

    • Backlit display ensures easy readability in low light situations

    • Temperature compensated pressure sensor

  • testo 435-4 - Multifunction meter w/ memory, software, and differential pressure

    Order-Nr. 0563 4354

    The testo 435-4 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-4.

    • Integrated differential pressure measurements for flow velocity

    • Optional wireless (RF) temperature and humidity probes for remote measurement

    • Backlit LCD for easy viewing

    • Built-in memory stores up to 10,000 measurements

  • testo 445 - Service instrument for air conditioning / ventilation systems

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument; this versatile tool can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. This climate measuring instrument supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 510i - Differential pressure manometer wireless Smart Probe

    Order-Nr. 0560 1510

    The testo 510i Smart Probe is a wireless differential pressure probe used for accurate low-pressure measurements.  The testo 510i is great for measuring pressure in manifolds, static pressure, and pressure drops in buildings or ventilation systems.  Use it to measure the pressure drop across coils and filters, or in ducts and systems.

    • Measures static pressure, air flow, and volume flow (pitot tube not included)

    • Measures manifold pressure and pressure drop across filters and coils, and has a measurement menu in the Smart Probes app that includes pressure drop alarms

    • Easy configuration and calculations for volume flow (enter pitot tube factor and dimensions easily)

    • Magnetic back holds instrument for hands-free operation

17 Products found