Air outlets

23 products or recommendations for Air outlets
  • testo Smart Probes VAC Set - Wireless Smart Probe Kit

    Order-Nr. 0563 0003

    The testo VAC Smart Probe Set provides a combination of four Smart Probe instruments, used with your smartphone or tablet to test and balance multi-outlet ventilation systems.  Two types of anemometers give you the capacity to measure in-duct air flow, and the flow from each vent.  Using the IR temperature probe for surface temperatures will show you motor and electrical equipment conditions, also allowing for easy checking of each outlet.  Lastly, the thermohygrometer provides an assessment of the humidity and dewpoint levels throughout the system.

    • Measures air velocity, temperature, relative humidity, wet bulb / dew point, and calculates volume flow

    • Kit includes instruments to measure, balance, troubleshoot, and optimize ventilation systems performance

    • RH & air flow measurements in-duct and at registers, viewed simultaneously in the testo Smart Probes app (405i, 410i, 605i)

    • App calculates system enthalpy with air flow & RH probes; app allows you to photograph objects with a smart device, capturing measurement marker and temperature values for reference and reporting (805i)

  • testo 480 - Digital temperature and humidity meter

    Order-Nr. 0563 4800

    Air flow measurements in ventilation ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms – the testo 480 temperature and humidity meter comes with a wide range of optional sensors that allow you to measure, analyze, and log these and a variety of other parameters with only one device.

    • High quality optional sensors for measuring air flow / temperature / humidity / pressure / degree of turbulence / heat radiation / CO2 / illumination intensity / PMV / PPD / WBGT

    • High precision, integrated pressure difference sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 410-2 - Vane anemometer with humidity measurement

    Order-Nr. 0560 4102

    The testo 410-2 handheld anemometer with humidity measures air flow, air temperature, and humidity quickly, easily, and accurately. The compact testo 410-2 air and humidity meter is ideal for fast comfort spot checks and timed averaging calculation.

    • Integrated RH sensor provides %rH, wet bulb, and dew point readings

    • Small 1.5 inch vane meter

    • Hold, Min, Max, and Timed averaging

    • Lens cover and leather belt case keep it protected - even in your tool box

  • testo 410-1 - Vane anemometer

    Order-Nr. 0560 4101

    The testo 410-1 pocket anemometer measures air flow and air temperature quickly, easily, and accurately. The integrated 1.5 inch vane makes this economical air flow instrument ideal for fast air velocity measurement spot checks.

    • Integrated, small 1.5 inch vane

    • Hold, Min, Max, and Timed averaging

    • Bright backlit display for easy viewing, no matter the environment

    • Lens cover and leather belt case keep it protected

  • testo 435-4 - Multifunction meter w/ memory, software, and differential pressure

    Order-Nr. 0563 4354

    The testo 435-4 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-4.

    • Integrated differential pressure measurements for flow velocity

    • Optional wireless (RF) temperature and humidity probes for remote measurement

    • Backlit LCD for easy viewing

    • Built-in memory stores up to 10,000 measurements

  • testo 410i - Vane anemometer wireless Smart Probe

    Order-Nr. 0560 1410

    The testo 410i Smart Probe is a compact wireless vane anemometer for measuring air velocity, temperature, and deriving volume flow.  It can be used at air outlets, and for monitoring the air flow of ventilation systems.

    • Measures air velocity, volume flow, and temperature, as well as air flow at registers, and automatically calculates volume flow (simply enter the duct dimensions)

    • No air density correction required, due to its design

    • Measure volume flow at several outlets simultaneously (using mutiple Smart Probes), to adjust system balance

    • Timed/multipoint averaging to get accurate air flow profiles

  • testo 417 Kit - Rotating Vane Anemometer

    Order-Nr. 400563 4170

    With readings of up to 4,000 fpm and the attached large vane, the testo 417 rotating vane anemometer kit is ideal for collecting reliable measurements for air velocity, CFM, and temperature at both supply and return grills. The included soft carrying case ensures the air flow meter is protected against light drops and the elements.

    • Soft carrying case for worry-free transportation

    • Air velocity, CFM, and temperature measurements

    • Multi-point and timed average calculations for in-duct readings

    • Bright backlit display provides easy viewing in any environment

  • testo 435-2 - Multifunction meter w/ memory and software

    Order-Nr. 0563 4352

    The testo 435-2 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-2.

    • Built-in memory stores up to 10,000 measurements

    • Optional wireless (RF) temperature and humidity probes for remote measurement

    • Backlit LCD for easy viewing

    • Optional printer allows for easy documenting of measured data

  • testo 445 - Service instrument for air conditioning / ventilation systems

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument; this versatile tool can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. This climate measuring instrument supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 435-1 - Multifunction meter

    Order-Nr. 0560 4351

    The testo 435-1 is an economic multifunction meter capable of monitoring, analyzing, and diagnosing indoor air quality. In addition, you can easily pinpoint and troubleshoot airflow problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-1.

    • Wide array of probes available for various applications

    • Optional wireless (RF) temperature probes for remote measurement

    • Backlit LCD for easy viewing

    • Optional printer allows for easy documenting of measured data

  • testo 420 - Air flow capture hood

    Order-Nr. 0563 4200 / 400563 4200

    The CEC compliant testo 420 air flow capture hood with Bluetooth is the accurate, lightweight, and convenient solution for measuring volume flows at supplies and returns. Handling this air flow capture hood with its flow straightener and tiltable display is especially easy, with its low weight of less than 6.4 lbs, 24" x 24" included hood dimensions, and ergonomic handles.

    • Rugged and durable 24" x 24" air flow capture hood weighs less than 6.4 lbs (with base)

    • Large, tiltable, removable backlit display makes readings easy to see

    • Flow straightener for more precise measurement at turbulent outlets

    • App integration via Bluetooth for fast and easy monitoring and reporting on site

  • testo 435-3 - Multifunction meter w/ integrated differential pressure

    Order-Nr. 0560 4353

    The testo 435-3 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot airflow problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-3.

    • Integrated differential pressure measurements for flow velocity

    • Optional wireless (RF) temperature probes for remote measurement

    • Backlit LCD for easy viewing

    • Optional printer allows for easy documenting of measured data

  • Flow Funnel Kit - funnel set for volume flow measurement

    Order-Nr. 0563 4170

    The flow funnel kit is an optional kit for the testo 417, and can be used with the vane attachment of the testo 435. The flow funnel is ideal for measurements below 50 CFM. The funnel kit Includes an 8 inch round and 13 inch square funnel, ensuring proper measurements for a variety of ducts.

    • Convenient, quick volume flow measurement

    • With the funnel set, the time-consuming loop method is a thing of the past

    • Suitable for outlets up to 300 x 300 mm

    • Easy to assemble

  • testo 440 - Vane kit with Bluetooth (Ø 3.9")

    Order-Nr. 0563 4403

    This testo 440 kit is great for carrying out measurements at air outlets. The testo 440 air velocity and IAQ measuring instrument and its vane probe (Ø 3.9") with temperature sensor can all be safely stored in the included case.

    • Intuitive: Clearly structured measurement menus for volume flow, parallel determination of air velocity, and air temperature in ventilation ducts or at air outlets

    • Precise: Combine the Bluetooth vane probe with the extendable telescope for ceiling outlets, or the funnel set for plate outlets as needed (both sold separately)

    • Convenient: Wireless probe, internal memory for data storage, and USB port for data export

    • Versatile: Your testo 440 setup can be expanded with a large selection of digital probes

  • testo 440 - Air flow ComboKit 1 with Bluetooth

    Order-Nr. 0563 4406

    This testo 440 kit is great for carrying out measurements in ventilation ducts and at air outlets. The testo 440 air velocity and IAQ measuring instrument, its vane probe (Ø 3.9") with Bluetooth and temperature sensor, and hot wire probe including temperature sensor can all be safely stored in the included case.

    • Intuitive: Clearly structured measurement menus for volume flow and parallel determination of air velocity, humidity, and temperature in ventilation ducts, or at ventilation outlets

    • Clever: Hot wire probe (Ø 0.35") with telescope (2.8') – combine the Bluetooth vane probe (Ø 3.9") with the telescope for ceiling outlets, or the funnel set for plate outlets (sold separately)

    • Convenient: Wireless probes, internal memory for data storage, and USB port for data export

    • Versatile: Your testo 440 setup can be expanded with a large selection of digital probes

  • testo 440 - Air flow ComboKit 2 with Bluetooth

    Order-Nr. 0563 4407

    This testo 440 kit is great for carrying out measurements in ventilation ducts and at air outlets. The testo 440 air velocity and IAQ measuring instrument and its vane probes can all be safely stored in the included case.

    • Intuitive: Clearly structured measurement menus for volume flow and determination of air velocity, humidity, and temperature in ventilation ducts, or at ventilation outlets

    • Clever: Vane probe (Ø 0.63") with telescope (2.8') – combine the Bluetooth vane probe (Ø 3.9") with the telescope for ceiling outlets, or the funnel set for plate outlets (sold separately)

    • Convenient: Wireless probes, internal memory for data storage, and USB port for data export

    • Versatile: Your testo 440 setup can be expanded with a large selection of digital probes

  • testo 440 dP - Air flow ComboKit 1 with Bluetooth and delta P

    Order-Nr. 0563 4409

    Carry out measurements without any annoying cables: use the kit to handle all relevant measurements in ventilation ducts and at air/ceiling outlets. You will receive the testo 440 dP air velocity and IAQ measuring instrument including differential pressure sensor and the 100 mm vane probe head and hot wire probe head (Ø 9 mm) for attachment to the universal Bluetooth handle supplied.  To make measurements more convenient, both probe heads can be combined with the telescope included in the kit. The equipment can be transported safely and conveniently in the robust case.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, differential pressure, humidity and temperature in ventilation ducts or at ventilation outlets

    • Space-saving: simply combine the universal Bluetooth handle with the 100 mm vane or hot wire probe head and the extendable telescope (1.0 m)

    • Convenient: wireless probes, internal data storage and USB port for data export

    • As multifaceted as your challenges themselves: the testo 440 dP has an integrated differential pressure sensor and can be expanded with a large portfolio of digital probes

  • testo 440 dP - Air flow ComboKit 2 with Bluetooth and delta P

    Order-Nr. 0563 4410

    Carry out measurements without any annoying cables: use the kit to handle all relevant measurements in ventilation ducts and at air/ceiling outlets. You will receive the testo 440 dP air velocity and IAQ measuring instrument including differential pressure sensor, two vane probe heads (Ø 100 mm and Ø 16 mm) and a humidity/temperature probe head – all three can be attached to the universal Bluetooth handle supplied. To make measurements more convenient, both vane probe heads can be combined with the telescope included in the kit. The equipment can be transported safely and conveniently in the robust case.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, differential pressure, humidity and temperature in ventilation ducts, at ventilation outlets and in work rooms

    • Space-saving: combine the universal Bluetooth handle with the humidity/temperature probe head or extendable telescope (1.0 m). Vane probe heads (Ø 16 mm, Ø 100 mm) can simply be plugged onto the telescope

    • Convenient: wireless probes, internal data storage and USB port for data export

    • As multifaceted as your challenges themselves: the testo 440 dP has an integrated differential pressure sensor and can be expanded with a large portfolio of digital probes

  • Vane probe (Ø 100 mm, digital) - including temperature sensor, wired

    Order-Nr. 0635 9432

    Use the vane probe to determine air velocity, volume flow and temperature at air outlets, as well as at plate outlets, ventilation grilles or swirl outlets.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature

    • Precise: get the right results in next to no time, even in turbulent air flow – using the optionally available funnel set and volume flow straightener

    • Convenient: probe with a practical button on the handle for storing individual readings, convenient measurement at ceiling outlets with optional telescope (up to 1 m)

    • Intelligent calibration concept

  • Vane probe (Ø 100 mm, digital) - with Bluetooth® including temperature sensor

    Order-Nr. 0635 9431

    Use the vane probe to determine air velocity, volume flow and temperature at air outlets, as well as at plate outlets, ventilation grilles or swirl outlets. The readings are transmitted directly to your measuring instrument via Bluetooth, making your measurements particularly convenient.

    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature

    • Precise: get the right results in next to no time, even in turbulent air flow – using the optionally available funnel set and volume flow straightener

    • Convenient: Bluetooth connection between measuring instrument and probe, with a practical button on the handle for storing individual readings, convenient measurement at ceiling outlets with optional telescope (up to 1 m)

    • Intelligent calibration concept

23 Products found
Show More