1. Home
  2. testo DiSCmini

testo DiSCmini - handheld measuring instrument for nanoparticle counting

  • Measurement and display of particle number, mean particle diameter and LDSA (Lung Deposited Surface Area) with a time resolution of 1 second.
  • Operation without solvents or radioactive radiation sources
  • Insensitive to vibrations, and operation is possible in any position
  • Long battery lifetimes of up to 8 hours
  • Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.
    The hand-held particle counter testo DiSCmini measures the number and average diameter of nanoparticles efficiently, based on the electrical charging of aerosols. For example, with the testo DiSCmini you can reliably monitor human exposure to diesel soot, welding fumes or industrial nanoparticles. With the handy testo DiSCmini, you can take your measurements anywhere.

    Health risk due to nanoparticles

    Previous studies describe the negative impacts of ultrafine particles on health based on vague benchmarks. With the testo DiSCmini, it is now possible to measure the particle number concentration and surface area of occurent nanoparticles, LDSA (Lung Deposited Surface Area).


    Typical applications

    Typical applications of the DiSCmini include the determination of personal exposure in particle-contaminated workplaces (for example due to diesel soot, welding fumes and industrial nanoparticles) or in vulnerable groups (such as asthmatics or COPD patients). In addition to this, the testo DiSCmini offers various application possibilities in different disciplines of scientific research.

    The small size of the testo DiSCmini makes the instrument particularly suitable for mobile on-site measuring tasks and the set-up of networks for the monitoring of ambient air. Thanks to the measurement rate with a time resolution of 1 Hz for all three measurement parameters, you also identify quick alterations in the aerosol number.

    testo DiSCmini at a glance

    • Hand-held nanoparticle counter for measuring the number and average diameter of nanoparticles, with a time resolution of up to 1 second (1 Hz)
    • Simultaneous recording of particle number concentration and particle size enables you to determine other characteristic parameters such as particle surface area (Lung Deposited Surface Area, LDSA)
    • Battery operation with a service life of up to 8 hours
    • Save the data on a memory card and transfer it to an external computer via USB
    • No operating resources such as working fluid or radioactive sources are needed – the testo DiSCmini can be operated over extended periods in any position
    • No operating resources such as working fluid or radioactive sources are needed – the testo DiSCmini can be operated over extended periods in any position and with no topping up of any fluid

    Handheld nanoparticle counter testo DiSCmini including transport case, carry bag, SD card and SD card reader, set for extending of the sample inlet, Mascot battery charger, country-specific power cord (optional) and calibration certificate.

    Algemene technische gegevens

    Relatieve luchtvochtigheid
    < 90 %rF, niet condenserend
    700 g
    180 x 90 x 42,5 mm
    +10 tot +30 °C
    levensduur batterij
    Typisch 8 uur met een vol geladen accu, afhankelijk van de omgevingstemperatuur
    Netadapter, 100-120 volt of 200-240 volt, 50/60 Hz voor opladen accu
    800 tot 1100 mbar absoluut
    Operating air pressure
    ±20 mbar (Delta p max. bij de luchtinlaat)


    10 tot 300 nm (modale waarde)
    10 tot 700 nm (absoluut)
    1000 tot 1000000 Particle/cm³ (typische waarden)
    De gedetecteerde deeltjesconcentratie hangt af van de grootteverdeling van de deeltjes en de gemiddelde tijd van de meting.
    ±30 % typisch voor grootte en aantal
    ±100 Particle/cm³ absoluut in aantal

    • Software for analysis, visualization and export of measure data as well as for modifying numerous measurement parameters, requires Java Runtime Environment or Java Development Kit