logo
  1. Home
  2. Heated industrial probe set

Heated industrial probe set

0600 7630
  • A high degree of measuring accuracy, even if the flue gas contains high concentrations of NO2 or SO2
  • Measurements in applications with flue gas temperatures of up to 600 °C
  • Short time needed to set up the heated industrial probe (ready for operation in 20 minutes maximum)
  • Very easy to handle
  • Ideal para medição oficial de emissões (teste de conformidade): o kit de sondas industriais aquecidas compreende um eixo de sonda aquecido de até 600 ° C, uma mangueira de amostragem de gás aquecida (comprimento 4 m) e um termopar tipo K - isso significa que você está idealmente equipado.

    A heated sampling system is necessary when the situation requires maximum measuring accuracy (e.g. if there are high concentrations of NO2 or SO2 in the flue gas) or if a heated system is a legal requirement in your country. A heated system prevents condensation of the flue gas being measured within the sampling system. Gaseous media are transported over short and long distances at constant temperature.

    For applications of this kind, which require heated sampling, we offer our heated industrial probe set for the extractive sampling of flue gas being analyzed. It can be used in combination with the testo 350 or testo 340. Easy to handle, the heated industrial probe set prevents condensate forming and prevents the temperature within the sampling system falling below the flue gas dewpoint.

    The heated sampling tube (600 °C) can be extended to a max. 3 m using optional extension tubes. The thermocouple (2.2m) can be added as an accessory to enable you to carry out simultaneous temperature measurement with a 2m long probe. You can also install an optional preliminary filter for measurements involving a high dust load.

    Applications

    You can use the heated industrial probe set (in combination with the testo 350 or testo 340) for the following applications:

    • Emissions measurement to monitor prescribed limit values
    • Measurements on a variety of installations / trial set-ups in laboratories
    • Emissions check measurements within the flue gas cleaning system
    • Official emissions measurement (compliance testing, more information under the “Applications” tab)

    You can use other accessories to put together an application-specific sampling solution.

    The heated industrial probe set consists of the following components:

    • Heated probe shaft up to 600 °C flue gas temperature
    • Heated gas sampling hose
    • Thermocouple type K

    Dados técnicos gerais

    Peso
    4310 g
    Comprimento do eixo da sonda
    1.110 mm
    Carcaça
    Carcaça de metal
    Comprimento do cabo
    2,6 m
    Diâmetro do eixo da sonda
    25 mm
    Temperatura máxima
    600 °C
    Product colour
    Preta; silver

    Medição das emissões oficiais (teste de conformidade)

    Na maioria dos países, as operações de todos os tipos de parques industriais (por exemplo: grandes usinas elétricas, aciarias, cimenteiras, vidraçarias e parques químicos) e instalações de autoridade locais, até os locais de pequena produção estão sujeitos às normas estritas que controlam as emissões de gás na atmosfera. Medidas adequadas devem ser tomadas para garantir e verificar regularmente que os componentes definidos como poluentes não excedam certos valores limite no gás de combustão.

    O analisador de gás de combustão testo 350 pode ser usado para efetuar a análise preliminar antes de uma leitura de emissões oficiais, ou, dependendo do país e diretiva, o teste de conformidade oficial.

    testo-350