1. Home
    2. testo 350 MARITIME

    testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    0563 3503
  1. With DNV and NK certificate 
  2. Unrestricted availability thanks to pre-calibrated gas sensors which are exchangeable on site
  3. Ready to measure in less than 2 minutes
  4. Tested gas sensors — as good as reference measurement technology
  5. In addition, the flue gas analyzer complies with the guidelines for marine equipment according to Marine Equipment Directive (MED)
  6. Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.
    The flue gas analyzer testo 350 MARITIME can be used for emission measurement on marine diesel engines for measuring the gaseous exhaust gas concentrations of NO, NO2, SO2, CO, CO2-(IR), O2. In order to meet the harsh requirements at sea, the complete flue gas analyzer, including accessories, is housed in a robust protective case with a trolley function – the testo 350 MARITIME flue gas analyzer certainly isn't a landlubber.

     

    The testo 350 MARITIME flue gas analyzer goes full speed ahead

    As a seaworthy flue gas analyzer, the testo 350 MARITIME can be used for the following on-board verification surveys in accordance with the NOx Technical Code 2008: For the simplified testing and measurement method, for instance if modifications have been made to the engine, such as readjustment
    The testo 350 MARITIME flue gas analyzer is also suitable for checking the NOx limit values stipulated in MARPOL Annex VI. The NOx values are for example tested in official NOx checks. The NOx measurement can also be used to provide proof of NOx reduction, which is required in regional special zones with specific NOx tax requirements (such as Norway).

     

    Outstanding: testo 350 MARITIME offers certified quality

    The testo 350 MARITIME flue gas analyzer has the following certificates:
    DNV Certificate No. TAA00001K0 Rev. 4, Nippon Kaiji Kyokai (Class NK) certificate no. TA23536M, MED Certificate No. MEDB0000328 Rev. 3 (Module B) and MEDD00002FU (Module D)

    • The testo 350 MARITIME V2 analyzer unit, equipped with NO, NO2, SO2, CO, CO2-(IR) and O2, including gas conditioning, measuring range extension for single slot (only for SO2), fresh air valve for long-term measurement, differential pressure sensor, temperature probe input type K NiCr-Ni and type S Pt10Rh-Pt, Testo data bus connection, rechargeable battery, integrated combustion air probe (NTC), trigger input, measurement data memory and USB interface
    • testo 350 MARITIME V2 Control Unit
    • Robust protective case with trolley function
    • Flue gas probe for industrial engines, 335 mm immersion depth including cone and heat protection plate, Tmax. +1,000°C, special hose for NO2-/SO2 measurements, length 4 m
    • Connection cable between flue gas analyzer and Control Unit, length 5 m
    • testo fast printer with wireless infrared interface, 1 roll of thermal paper and 4 mignon batteries for printing readings out on site
    • testo 610 humidity/temperature measuring instrument
    • DNV Certificate No. TAA00001K0 Rev. 4
    • Nippon Kaiji Kyokai (Class NK) certificate no. TA23536M
    • MED Certificate No. MEDB0000328 Rev. 3 (Module B) and MEDD00002FU (Module D)

    General technical data

    Weight
    Approx. 17 kg
    Dimensions
    565 x 455 x 265 mm (case)
    Operating temperature
    5 to +45 °C
    Product-/housing material
    TPE/PC + ABS/PC + ABS + 10% GF
    Connectable probes
    1 x combustion air temperature probe; 1 x flue gas probe; 1 x temperature probe; 1 x temperature probe; 1 x differential pressure
    Product colour
    Black
    Standards
    Germanischer Lloyd (DNV GL) Certificate Nippon Kaijik Kyokai (Class NK) certificate according to MARPOL Annex VI and NOx Technical Code 2008
    Power supply
    Li ion rechargeable battery; AC mains unit 100 V to 240 V (50 to 60 Hz)
    Power consumption
    max. 40 W
    Pump flow
    1 l / min. with flow monitoring
    Max. pos. press./flue gas
    50 mbar
    Max. neg. press./flue gas
    -300 mbar
    Dewpoint calculation
    0.04 °Ctd; 99 °Ctd
    Interface
    IR/IRDA interface; Bluetooth®; USB; data bus; trigger input; Differential Pressure; probe input/ probe inputs; DC-voltage input; Mains connection; dilution gas inlet for measurement range extension
    Storage temperature
    -20 to +50 °C

    Accessories

  7. Accessories
    Connection cable
    Connection cable
      :
      0430 0143
      MYR 352.83
    • Accessories
      testo-Schnelldrucker IRDA mit kabelloser Infrarot-Schnittstelle
      testo fast printer IRDA
        :
        0554 0549
        MYR 1710.28
      • Accessories
        Conection cable
        Connection cable with bayonet fitting - length 2 m
          :
          0449 0075
        • Accessories
          Connection cable with bayonet fitting - length 5 m
            :
            0449 0076
            • USB driver for the following devices with USB port: * USB Interface testo 174 / 177 - T + H * testo 300 / 320 / 330 / 330i / 335 / 340 / 350 * testo 435 * testo 556 / 560 / 570 / 580 * testo 635 * testo 735 * testo 845