Comfort probe for turbulence measurement

Draught is the most common cause of complaints about indoor climate. Use the comfort probe to determine turbulence. Turbulence corresponds to the extent of fluctuations in air velocity over time. It is needed to calculate the draught risk. The probe enables you to determine air velocity and draught risk in accordance with EN 13779. The probe can also measure temperature and ambient pressure at the same time.

Intelligent calibration concept

The probe offers maximum digital measurement reliability. The digital probe allows readings to be processed directly in the probe. This technology eliminates instrument measurement uncertainty. The probe can be sent in for calibration on its own (without the measuring instrument). Calculating the determined calibration data in the probe generates a zero-error display.

General technical data	Length probe 12.992 in. / 330 mm
Probe head diameter 3.543 in. / 90 mm
Standards EN 13779

Length probe

12.992 in. / 330 mm

Probe head diameter

3.543 in. / 90 mm

Standards

EN 13779

Temperature - NTC	Measuring range 32° to 122 °F / 0 to +50 °C
Accuracy ±0.9 °F / ±0.5 °C
Resolution 0.1 °F / 0.1 °C

Measuring range

32° to 122 °F / 0 to +50 °C

Accuracy

±0.9 °F / ±0.5 °C

Resolution

0.1 °F / 0.1 °C

Absolute Pressure	Measuring range +280 to +440 InH₂O / +700 to +1100 hPa
Accuracy ±1 InH₂O / ±3 hPa
Resolution 0.1 InH₂O / 0.1 hPa

Measuring range

+280 to +440 InH₂O / +700 to +1100 hPa

Accuracy

±1 InH₂O / ±3 hPa

Resolution

0.1 InH₂O / 0.1 hPa

Comfort level probe

Comfort level probe

Intelligent calibration concept

General technical data

General technical data

Temperature - NTC

Temperature - NTC

Absolute Pressure

Absolute Pressure

Accessories