- Home
- Cooking oil-temperature kit
Cooking oil-temperature kit
0563 0101Cooking oil-temperature kit
0563 0101Determine cooking oil quality easily and precisely with testo 270
Incl. reference oil for adjusting the cooking oil tester on site
Measure surface temperature and core temperature with testo 104-IR
Washable case for hygienically stowing away at the application site
With this kit, you are excellently equipped to monitor cooking oil quality and temperature limit values. Thanks to their reliable measurement technology, the cooking oil tester testo 270 and the penetration/infrared thermometer testo 104-IR are competent partners for food inspection measurements.
- 1 x testo 270 cooking oil tester incl. batteries, reference oil for cooking oil testers, testo 270 training card, calibration protocol and instruction manual
- 1 x testo 104-IR waterproof penetration/infrared thermometer incl. batteries, testo 104-IR training card and calibration protocol
- 1 x Transport case food small (0516 7302)
Temperature - PTC
| Measuring range | +40 to +200 °C |
|---|---|
| Accuracy | ±1.5 °C |
| Resolution | 0.1 °C |
TPM - Capacitive
| Measuring range | 0.0 to 40.0 % TPM |
|---|---|
| Accuracy | ±2 % TPM (+40 to +190 °C) *typically, based on Testo in-house reference, at an ambient temperature of 25 °C |
| Resolution | 0.5 % TPM (+40 to +190 °C) |
General technical data
| Operating humidity | 0 to +90 %RH |
|---|---|
| Weight | 255 g |
| Reaction time | Approx. 30 s |
| Dimensions | 170 x 50 x 300 mm ((LxWxH)) |
| Operating temperature | 0 to +50 °C |
| Product-/housing material | TPE/PC + ABS/PC + ABS + 10% GF |
| Protection class | IP65 |
| Product colour | white |
| Authorizations | CE 2014/30/EU |
| Length probe shaft | 175 mm |
| Length probe shaft tip | 35 mm |
| Diameter probe shaft | 11 mm |
| Diameter probe shaft tip | 10 mm |
| Alarm features | Upper and lower TPM limit value freely adjustable, visual alarm via 3-colour display backlighting (green, orange, red), values and illumination flash in the display until the measurement is ended (Auto Hold) |
| Battery type | 2 batteries type micro AAA 1.5 V (LR03) |
| Battery life | at 20 °C approx. 25 h continuous operation (corresponds to approx. 500 measurements ), without display lighting |
| Display type | LCD (Liquid Crystal Display) |
| Display size | 2 lines |
| Display ligthing | backlite |
| Storage temperature | -20 to +70 °C |
| Application temperature | +40 to +200 °C |
Temperature - NTC
| Measuring range | -50 to +250 °C |
|---|---|
| Accuracy | ±1 °C (-50.0 to -30.1 °C) ±1 % of mv (Remaining Range) ±0.5 °C (-30.0 to +99.9 °C) |
| Resolution | 0.1 °C |
| Reaction time | t₉₉ = 10 s (measured in moving liquid) |
Temperature - Infrared
| Measuring range | -30 to +250 °C |
|---|---|
| Accuracy | ±1.5 °C or ±1.5 % of mv (Remaining Range) ±2.0 °C (-20 to -0.1 °C) ±2.5 °C (-30 to -20.1 °C) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
General technical data
| Weight | 198 g (incl. batteries) |
|---|---|
| Dimensions | 281 x 48 x 23 mm (Probe folded out) 178 x 48 x 23 mm (probe folded away) |
| Operating temperature | -20 to +50 °C |
| Protection class | IP65 |
| Length probe shaft tip | 32 mm |
| Diameter probe shaft | 3 mm |
| Diameter probe shaft tip | 2.5 mm |
| Product-/housing material | ABS / TPE / PC, diecast zinc, stainless steel |
| Length probe shaft | 106 mm |
| Product colour | white |
| Laser spot | on / off |
| Measurement value | Temperature °C / °F / °R |
| Measurement mode | Hold or auto hold (immersion probe) |
| Dimensions (probe folded out) | 281 x 48 x 23 mm |
| Dimensions (probe not folded out) | 178 x 48 x 23 mm |
| Standards | EN 13485 |
| Battery type | 2 AAA micro batteries |
| Battery life | 10 h at 25°C typical |
| Display type | LCD (Liquid Crystal Display) |
| Display size | one-line |
| Display function | with status line (°C,°F,°R, battery, hold/auto hold, min, max, laser, measurement, emissivity) |
| Display ligthing | illuminated |
| Storage temperature | -30 to +70 °C |
General technical data
| Dimensions | 340 x 60 x 270 mm ((LxWxH)) |
|---|---|
| Product-/housing material | Plastic |
| Product colour | white |
Accessories
Certificates
Temperature checking for incoming goods and during transport and storage
The temperature of foods has a crucial influence on the formation and proliferation of germs and therefore on product quality and consumer health. In order to ensure food safety, there is therefore an obligation to monitor the temperatures of foods and to check that cooling chain compliance is uninterrupted. Among the measures used to achieve this is checking temperature on receipt and during transport and storage of the goods. The testo 104-IR infrared and penetration thermometer helps you to do this. It offers:
- Fast scanning of the goods delivered using infrared measuring technology
- Immediate checking where values are critical via fold-out penetration probe
- Simple display of the measuring range via 2-point laser
- Robustness thanks to a waterproof housing
- HACCP-compliant measurement
- Recommendation certificate testo 270(pdf, 119.32 kB)
- Recommendation testo 270(pdf, 119.32 kB)
- HACCP Certificate Deep-frying Oil Tester(pdf, 205.84 kB)
- Data sheet testo 270(pdf, 259.46 kB)
- Trainingscard testo 270 Calibration and Adjustment(pdf, 435.51 kB)
- Trainingscard testo 270 Operation and Maintenance(pdf, 605.75 kB)
- Trainingscard testo 104-IR(pdf, 537.0 kB)
- Data sheet testo 104 IR(pdf, 409.71 kB)
- HACCP Certificate Equipment Temperature Monitoring(pdf, 202.68 kB)
- Trainingscard Temperature limit values - Incoming Goods(pdf, 191.27 kB)
- Trainingscard Obligations of the food trader(pdf, 179.6 kB)
- Trainingscard Non-contact measurement(pdf, 292.8 kB)
- Trainingscard Penetration measurement(pdf, 335.49 kB)
- Trainingscard HACCP(pdf, 427.66 kB)
- EU declaration of conformity testo 270(pdf, 33.41 kB)
- Instruction manual testo 270(pdf, 1.33 MB)
- Short manual testo 270(pdf, 277.73 kB)
- EU declaration of conformity testo 104-IR(pdf, 31.83 kB)
- Instruction manual testo 104-IR(pdf, 1.34 MB)