- Home
- testo 330-2 LL
testo 330-2 LL
0563 3372 76
testo 330-2 LL
0563 3372 76Flue gas analyzer with longlife gas sensors and integrated draught and gas zeroing
• High-resolution colour display for the graphic representation of your measurement data
• Extended measurement menus – such as gas pipe testing – for a comprehensive analysis of your heating system
• Logger function for easy long-term recording of the measurement curve
General technical data
| Weight | 600 g (without rechargeable battery) |
|---|---|
| Dimensions | 270 x 90 x 65 mm |
| Operating temperature | -5 to +45 °C |
| Display size | 240 x 320 pixels |
| Display function | Colour graphic display |
| Power supply | Rechargeable battery pack 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A |
| Maximum memory | 500,000 readings |
| Storage temperature | -20 to +50 °C |
Differential Pressure - Piezoresistive
| Measuring range | 0 to 300 hPa |
|---|---|
| Accuracy | ±0.5 hPa (0.0 to 50.0 hPa) ±1.5 % of mv (Remaining Range) ±1 % of mv (50.1 to 100.0 hPa) |
| Resolution | 0.1 hPa |
Flue gas O₂
| Measuring range | 0 to 21 Vol.% |
|---|---|
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.1 Vol.% |
| Reaction time t₉₀ | < 20 s |
- Instruction manual EasyHeat software(pdf, 3.55 MB)
- Testo ZIV driver ZIV 2000 for testo 320 and testo 330(v2.1, 2.22 MB)Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.
- If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.
A description and all necessary files can be found under the search term: Update-Kit / Bootloader - Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
- USB FlashUpdate testo 330 v2006 Shortdiscription(pdf, 217.61 kB)This software supports you in updating the software of your testo 330. Please read the instruction manual (german / english) for more information.
- Update-Kit / Bootloader(V1.22, 1.24 MB)(testo 330 LL | testo 330i | testo 350 Control Unit + Analysis Box | testo 320)
If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.