logo
  1. Home
  2. testo 410-2

testo 410-2 - Vane anemometer

0560 4102
ZAR 4,091.45 ZAR 4,705.17
1
  • Permanently installed vane with a diameter of 30 mm
  • Measurement of air velocity, air temperature and humidity
  • Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force
  • Includes single-point averaging, max/min and Hold function
  • Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.
    With its handy format, our testo 410-2 vane anemometer is extremely practical for fast check measurements at ventilation grilles and outdoors. With the permanently installed vane (diameter 30 mm), you can even measure low air velocities from 0.4 m/s to 20 m/s.
    The anemometer is equipped with our Testo humidity sensor featuring long-term stability and with an NTC temperature sensor with a measuring range of -10 to +50 °C for inspecting the air conditions. You can therefore use this to measure air temperature and humidity reliably. The testo 410-2 displays other parameters at the touch of a button: the dew point and wet bulb temperature as well as the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.

    The anemometer offers practical accessories and useful functions

    We have equipped the vane anemometer with a clip-on protective cap. This offers reliable protection if you are not using the testo 410-2 straight away. During the measurement you can use the fitted wrist strap, which prevents the vane anemometer from falling.
    Take a look at the useful functions offered by the anemometer:
    • Single-point averaging: calculation of the mean air velocity, for example at ventilation grilles (air outlets)
    • Hold function: enables the current measurement data relating to air velocity, humidity and air temperature to be recorded and compared with each other
    • Max/min values: displays the minimum or maximum values since the vane anemometer was last switched on or reset
    • Illuminated display: read off your readings quickly and easily, even if visibility is poor
    • Selectable units: air velocity: m/s, km/h, fpm, mph, kts and Beaufort; air temperature: °C, °F and wind chill; humidity: relative humidity, wet bulb and dew point temperature

    testo 410-2 vane anemometer for measuring air velocity, humidity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.

    Customers who viewed this product also viewed

  • Customers who viewed this product also viewed
    testo 410-2
    testo 410-2 - Vane anemometer
    • Permanently installed vane with a diameter of 30 mm
    • Measurement of air velocity, air temperature and humidity
    :
    0560 4102
    1
  • Customers who viewed this product also viewed
    Testo 410
    testo 410-1 - Vane anemometer
    • Vane anemometer with permanently installed 30 mm vane
    • Measurement of air velocity and air temperature
    :
    0560 4101
    1
  • Customers who viewed this product also viewed
    testo 440 Delta P Air Flow ComboKit 2 with Bluetooth®
    testo 440 delta P Air Flow ComboKit 2 with Bluetooth®
    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, differential pressure, humidity and temperature in ventilation ducts, at ventilation outlets and in work rooms
    • Space-saving: combine the universal Bluetooth handle with the humidity/temperature probe head or extendable telescope (1.0 m). Vane probe heads (Ø 16 mm, Ø 100 mm) can simply be plugged onto the telescope
    :
    0563 4410
    1
  • Customers who viewed this product also viewed
    testo 400 air flow kit with hot wire probe
    testo 400 air flow kit with hot wire probe
    • Standard-compliant determination of the volume flow in ducts using grid measurements as per EN ISO 12599 and ASHRAE 111
    • Determination of the volume flow at outlets by measuring the reference pressure and entering the manufacturer-specific K-factor
    :
    0563 0400 71
  • Customers who viewed this product also viewed
    testo 400 air flow kit with 16 mm vane probe
    testo 400 air flow kit with 16 mm vane probe
    • Standard-compliant determination of the volume flow in ducts using grid measurements as per EN ISO 12599 and ASHRAE 111
    • Determination of the volume flow at outlets by measuring the reference pressure and entering the manufacturer-specific K-factor
    :
    0563 0400 72
  • Customers who viewed this product also viewed
    testo 440 100 mm Vane Kit with Bluetooth®
    testo 440 100 mm Vane Kit with Bluetooth®
    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, humidity and temperature in ventilation ducts or at air outlets
    • Precise: combine the vane probe with Bluetooth with the telescope for ceiling outlets or the funnel set for plate outlets (please order separately) as required
    :
    0563 4403
    1
  • Customers who viewed this product also viewed
    testo 440 Air Flow ComboKit 1 with Bluetooth®t 1 with Bluetooth
    testo 440 Air Flow ComboKit 1 with Bluetooth®
    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, humidity and temperature in ventilation ducts or at ventilation outlets
    • Clever: hot wire probe with telescope (0.85 m) – combine the vane probe (Ø 100 mm) with Bluetooth with the telescope for ceiling outlets or the funnel set for plate outlets (please order separately) as required
    :
    0563 4406
    1
  • Customers who viewed this product also viewed
    testo 440 16 mm Vane Kit
    testo 440 16 mm Vane Kit
    • Intuitive: clearly structured measurement menu for volume flow and determination of air velocity in ventilation ducts
    • Convenient: integrated telescope that can be extended to 0.85 m, with scaling, makes it easy to carry out measurements
    :
    0563 4401
    1
  • Customers who viewed this product also viewed
    testo 440 Delta P Air Flow ComboKit 1 with Bluetooth®
    testo 440 delta P Air Flow ComboKit 1 with Bluetooth®
    • Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, differential pressure, humidity and temperature in ventilation ducts or at ventilation outlets
    • Space-saving: simply combine the universal Bluetooth handle with the 100 mm vane or hot wire probe head and the extendable telescope (1.0 m)
    :
    0563 4409
    1
  • Customers who viewed this product also viewed
    testo 440 Air Flow ComboKit 2 with Bluetooth®
    testo 440 Air Flow ComboKit 2 with Bluetooth®
    • Intuitive: clearly structured measurement menu for volume flow and determination of air velocity, humidity and temperature in ventilation ducts or at ventilation outlets
    • Clever: vane probe (Ø 16 mm) with telescope (0.85 m) – combine the vane probe (Ø 100 mm) with Bluetooth with the telescope for ceiling outlets or the funnel set for plate outlets (please order separately) as required
    :
    0563 4407
    1
  • Customers who viewed this product also viewed
    testo 417 kit 1
    testo 417 kit 1 - Vane anemometer with measurement funnels
    • Easy, fast and precise measurement of flow, volume flow and temperature at air inlets and outlets
    • Efficient regulation of balanced residential ventilation and fast documentation with the testo Smart App
    :
    0563 1417
    1
  • Customers who viewed this product also viewed
    testo 417 kit 2
    testo 417 kit 2 - Vane anemometer with measuring funnels and flow straightener
    • Easy, fast and precise measurement of flow, volume flow and temperature at air inlets and outlets
    • Efficient regulation of balanced residential ventilation and fast documentation with the testo Smart App
    :
    0563 2417
    1
  • Customers who viewed this product also viewed
    testo 417
    testo 417 - Digital 100 mm vane anemometer with App connection
    • Easy, fast and precise measurement of flow, volume flow and temperature at air inlets and outlets
    • Efficient regulation of balanced residential ventilation and fast documentation with the testo Smart App
    :
    0563 0417
    1
  • Customers who viewed this product also viewed
    testo 416
    testo 416 - Digital 16 mm vane anemometer with App connection
    • Simple, fast and precise flow measurement and volume flow calculation in the ventilation duct
    • More flexibility for duct measurements with the cable-connected telescopic probe (maximum length 850 mm)
    :
    0563 0416
    1
  • Temperature - NTC

    Measuring range
    -10 to +50 °C
    Accuracy
    ±0,5 °C
    Resolution
    0,1 °C
    Measuring rate
    0,5 s

    Humidity - Capacitive

    Measuring range
    0 to 100 %RH
    Accuracy
    ±2,5 %RH (5 to 95 %RH)
    Resolution
    0,1 %RH
    Please see the additional accuracy information for humidity in the instruction manual.

    Velocity - Vane

    Measuring range
    0,4 to 20 m/s
    Accuracy
    ±(0,2 m/s + 2 % of mv)
    Resolution
    0,1 m/s