Pressure measurement - Filter

Air conditioning systems are equipped with filters which prevent dirt from the outside air entering the indoor air. These must be regularly subjected to differential pressure measurements to check whether the filter is still fully functional. To do so, the pressure is measured in front of and behind the filter. The result of this measurement is the differential pressure. If it is too high, the filter is contaminated and needs changing.

10 Products or Recomendations for Pressure measurement - Filter
  • testo 510 set - differential pressure measuring instrument

    Order-Nr. 0563 0510

    Differential pressure measurement on gas hot water heaters or on filters of air conditioning systems, and also flow measurements in ventilation ducts using a Pitot tube: the compact testo 510 differential pressure measuring instrument, which comes with a silicone connection hose and other useful accessories, can help you maintain and install systems in the sanitary and HVAC sector.
    • Differential pressure measurement from 0 to 100 hPa 

    • Flow measurement possible with a Pitot tube (available as an option)  

    • Magnets on the rear allow hands-free work 

    • 10 units to choose from, display in pascals can be selected 

    € 132,00
    z DDV-om € 161,04
  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.
    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

    € 756,00
    z DDV-om € 922,32
  • testo 512 - Differential pressure meter for 0…2 hPa

    Order-Nr. 0560 5126

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…2 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 2 and 17,5 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 385,00
    z DDV-om € 469,70
  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.
    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    € 712,00
    z DDV-om € 868,64
  • testo 512 - Differential pressure meter for 0…200 hPa

    Order-Nr. 0560 5128

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 385,00
    z DDV-om € 469,70
  • testo 512 - Differential pressure meter for 0…20 hPa

    Order-Nr. 0560 5127

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0….20 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 5 and 55 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 385,00
    z DDV-om € 469,70
  • testo Smart Sonde HVAC/R Vrhunski kit

    Order-Nr. 0563 0002 31

    Vrhunski kit za inženirje na polju grelnih, klima, hladilnih in prezračevalnih sistemov: Kit vsebuje vse testo Smart Sonde in je popoln za izvajanje funkcionalnih kontrol ali vzdrževanje obrata (pogona), v kombinaciji z vašim pametnim telefonom/tabličnim računalnikom. Zahvaljujoč testo Smart Probes Aplikaciji, lahko delate lažje in učinkovitejše: Avtomatski izračunajte številne parametre kot so pregrevanje/podhlajevanje, ciljnoo pregrevanje, moč hlajenja/ogrevanja, diferencialne temperature ali detekcije plesni. Na koncu, poročilo o merilnih podatkih se lahko pošlje direktno po e-pošti kot PDF ali Excel datoteka.
    • Za vsa merjenja, ki vključujejo grelne, klima, hladilne in prezračevalne sisteme

    • Vse Smart Sonde za merjenje temperature, pritiska, vlažnosti in hitrosti pretoka v enem kitu

    • Prikaz trenda merilnih podatkov v obliki grafikona ali tabele

    • Prenos in analiza merilnih podatkov s pomočjo Testo Smart Probes Aplikacije

    Price on Request
  • testo 510 i - differential pressure measuring instrument with smartphone operation

    Order-Nr. 0560 1510

    Handy and intelligent: the compact testo 510i differential pressure measuring instrument featuring professional measuring technology and smartphone operation for measuring differential pressure, air flow velocity and volume flow. Readings can be viewed conveniently on your smartphone/tablet via the testo Smart Probes App and emailed directly.
    • Measurement of gas flow and static pressure

    • Measurement menu for pressure drop test including alerts

    • Simple configuration and determination of volume flow with Pitot tube

    • Magnetic holder for easy attachment

    € 89,00
    z DDV-om € 108,58
  • Testo Smart Sonde kit za ogrevanje

    Order-Nr. 0563 0004 10

    Za inženirje sistema ogrevanja: Kompaktni kit, ki vsebuje tri merilna instrumenta za izvajanje vaših najpomembnejših merilnih aktivnosti, ki vključujejo sisteme ogrevanja. Zahvaljujoč testo Smart Probes Aplikaciji, lahko delate lažje in učinkovitejše: Uporabljajte merilne menije za preizkus padca pritiska z opozorili ali za brezkontaktno infrardeče merjenje temperature s slikovnim dokumentiranjem, vključno z označavanjem merilnih vrednosti in merilnih točk. Na koncu, poročilo o merilnih podatkih se lahko pošlje direktno po e-pošti kot PDF ali Excel datoteka.
    • Brezkontaktno merjenje temperature, merjenje temperature pretoka in vračanja, kot tudi pritiska pretoka plina

    • Meni merjenja za preizkus padca pritiska, vključno z opozorili

    • Prikaz merilnih podatkov v obliki grafikona ali tabele in analiza ter pošiljanje le-teh preko testo Smart Probes Aplikacije

    • V kombinaciji z vašim pametnim telefonom/tabličnim računalnikom izvedite in preverite vse temperature in pritiske grelnih sistemov

    Price on Request
  • testo 510 - Differential pressure meter

    Order-Nr. 0560 0510

    The testo 510 differential pressure meter allows you to carry out pressure difference measurements at air condtioning system filters or air flow measurements in ventilation ducts using a pitot static tube. The trusty and reliable meter has been tried and tested in the field and is ideal for installation and maintenance work in and around ventilation and air conditioning.
    • Measuring differential pressure from 0 to 100 hPa

    • Air flow measurements with optional pitot static tube

    • Temperature and air density compensation for accurate measurements

    • Ten units of measurement (psi, fpm, hPa, m/s ) to choose from

10 Products found