Probes - Flue gas sampling pipes

The industrial probe set 1 800 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 800 °C).

• Very easy to handle

• Measurements in applications involving high flue gas temperatures of up to 1 800 °C

• Additional inline filter protects the gas sampling hose from contamination

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated thermocouple probe for temperature measurements up to 1000 °C

• NO₂/SO₂ special hose (length: 2.2 m)

Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.

• Flue gas path, draught path and temperature probe can be connected via a single probe coupling

• Easy-to-replace dirt filter

• Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

• Includes practical cone for attachment

Solid fuel set (probe shaft, adapter)

Compact basic flue gas probe with 180 mm long probe shaft, integrated thermocouple and dirt filter.

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated dirt filter protects instrument and sensors

• Integrated thermocouple probe for temperature measurements up to 500 °C

• Includes practical cone for attachment

You can use the thermocouple to measure the flue gas temperature in parallel with flue gas measurement on industrial engines

• Temperature measurement in parallel with the flue gas measurement on industrial engines

• Thermocouple with fast response time

• Can be installed on-site by the user

• Heat protection handle for comfortable handling even at high temperatures

The dual wall clearance probe (in combination with the appropriate measuring instrument) enables easy and reliable measurement of O2 supply air in the dual wall clearance. In addition, it can also be used to check the dual wall clearance for leaks and blockages.

• Detection of leaks and blockages in the dual wall clearance

• Curved probe for easy insertion into the dual wall clearance

Modular flue gas probe with a probe length of 180 mm and a diameter of 8 mm, including cone and short, flexible hose for straightforward set-up and dismantling. This flue gas probe can also be attached to the flue gas pipe using the optional testoFix probe holder.

• Thermocouple NiCr-Ni, Tmax: 500 °C

• Flexible hose (650 mm)

• Dirt filter

• TÜV-tested

Modular flue gas probe with a probe length of 300 mm and a diameter of 8 mm, with a cone for attaching it in the measurement aperture. However, the flue gas probe can also be securely and reliably attached to the flue gas pipe using the optional testoFix probe holder. The hose between probe and measuring instrument is shorter and more flexible than before, which makes set-up and dismantling significantly easier.

• Thermocouple NiCr-Ni, Tmax: 500 °C

• Flexible hose (650 mm)

• Dirt filter

• TÜV-tested

Modular flue gas probe, probe length 180 mm, diameter 6 mm, with a cone for attaching it in the measurement aperture. However, you can also attach this flue gas probe to the flue gas pipe securely and reliably using the testoFix probe holder. New: short, flexible hose for easier handling.

 

• Thermocouple NiCr-Ni, Tmax: 500 °C

• Flexible hose (650 mm)

• Dirt filter

• TÜV-tested

Modular flue gas probe, probe length 300 mm, diameter 6 mm, with cone. The testoFix probe holder is available for this probe as an optional accessory. Use this to attach the flue gas probe to the flue gas pipe quickly and securely. The probe hose is shorter (650 mm) and more flexible than before, to make your work easier.

• Thermocouple NiCr-Ni, Tmax: 500 °C

• Flexible hose (650 mm)

• Dirt filter

• TÜV-tested

The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C

• Made of metal: no melting of the handle due to radiated heat from the flue gas duct

• Additional particle filter in the hose provides protection from contamination

• Temperature measurement possible with optional thermocouple

• Probe shaft is easy to replace

The industrial probe set 1 200 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 200 °C) or for applications involving large flue gas pipe diameters.

• Very easy to handle

• Can be used in combination with testo 340 and testo 350

• Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

• Additional inline filter to protect the gas sampling hose from contamination

The flue gas probe from Testo makes it possible to carry out efficient flue gas measurements on industrial engines. In the case of diesel engines, the permanently welded-on preliminary filter provides protection from diesel particulates. It can be used at flue gas temperatures of up to 1,000 °C

• Useful for measurements on diesel engines: preliminary filter provides protection from diesel particulates

• Made of metal: no melting of the handle due to radiated heat from the flue gas duct

• Additional particle filter in the hose provides protection from contamination

• Temperature measurement possible with optional thermocouple

A heated sampling system is necessary when the situation requires maximum measuring accuracy, for instance (e.g. if there are high concentrations of NO₂ or SO₂ in the flue gas). For circumstances such as these, we offer our heated industrial probe set.

• A high degree of measuring accuracy, even if the flue gas contains high concentrations of NO2 or SO2

• Measurements in applications with flue gas temperatures of up to 600 °C

• Short time needed to set up the heated industrial probe (ready for operation in 20 minutes maximum)

• Very easy to handle

The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Preliminary filter offers protection from dusty flue gases

• Integrated thermocouple probe for temperature measurements up to 1000 °C

TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated dirt filter protects instrument and sensors

• Integrated thermocouple probe for temperature measurements up to 500 °C

TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated dirt filter protects instrument and sensors

• Integrated thermocouple probe for temperature measurements up to 500 °C

Flue gas probe; length 180 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included

Flue gas probe; length 300 mm; Ø 6 mm; Tmax. 500 °C; probe stop; NiCr-Ni thermocouple; 2.2 m hose and particle filter included