1. Home
    2. testo 830-T1

    testo 830-T1 - Infrared thermometer

    0560 8311
    MYR 454.48
  1. Infrared thermometer for non-contact surface temperature measurements
  2. 10:1 optics and high resolution processor for accurate measurement results
  3. Easy to use thanks to the gun-style design
  4. Adjustable emission level
  5. The testo 830-T1 infrared thermometer allows efficient, non-contact surface temperature measurements to be carried out. The IR thermometer will leave you well equipped, especially for control readings in trade and industry: The gun-style design is easy to handle and the integrated processor provides accurate measurement results.
    The testo 830-T1 IR thermometer with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry. 
     

    Overview of the advantages of the testo 830-T1 infrared thermometer

    Non-contact measurement of the surface temperature is accurate and fast with the testo 830-T1 infrared thermometer (2 measurements a second). To summarise the IR thermometer offers the following advantages:
     
    • High resolution processor for utmost accuracy (resolution 0.1 °C)
    • 10:1 optics for precise measurements even at medium distances
    • IR thermometer with 1 point laser measurement spot marker to target the measuring point
    • Two alarm limit values that can be defined as required
    • Visual and acoustic alarm if limit value exceeded
    • Min./max. value display and hold function (to record a measured value)
    • Convenient one-handed operation thanks to the ergonomic gun-style design
    • Clear, illuminated digital display
       
    The speed of the testo 830-T1 IR thermometer is impressive: it can take two measurements a second. This means you can undertake bigger measuring tasks fast and efficiently.

    The infrared thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.

    Testo 830-T1 infrared thermometer, including batteries and calibration protocol.
     

    Temperature - Infrared

    Measuring range
    -30 to +400 °C
    Accuracy
    ±1.5 °C or ±1.5 % of mv (+0.1 to +400 °C)
    ±2 °C or ±2 % of mv (-30 to 0 °C) (the higher value applies)
    Measuring rate
    0.5 s
    Infrared resolution
    0.1 °C

    General technical data

    Weight
    200 g
    Dimensions
    190 x 75 x 38 mm
    Operating temperature
    -20 to +50 °C
    Product-/housing material
    ABS
    Battery life
    15 h
    Battery type
    9V block battery
    Storage temperature
    -40 to +70 °C