- Home
- Cooking oil-temperature kit
Cooking oil-temperature kit
0563 0101Cooking oil-temperature kit
0563 0101Determine cooking oil quality easily and precisely with testo 270
Incl. reference oil for adjusting the cooking oil tester on site
Measure surface temperature and core temperature with testo 104-IR
Washable case for hygienically stowing away at the application site
With this kit, you are excellently equipped to monitor cooking oil quality and temperature limit values. Thanks to their reliable measurement technology, the cooking oil tester testo 270 and the penetration/infrared thermometer testo 104-IR are competent partners for food inspection measurements.
- 1 x testo 270 cooking oil tester incl. batteries, reference oil for cooking oil testers, testo 270 training card, calibration protocol and instruction manual
- 1 x testo 104-IR waterproof penetration/infrared thermometer incl. batteries, testo 104-IR training card and calibration protocol
- 1 x Transport case food small (0516 7302)
Temperature - PTC
| Measuring range | 104° to 392 °F / +40 to +200 °C |
|---|---|
| Accuracy | ±2.7 °F / ±1.5 °C |
| Resolution | 0.1 °F / 0.1 °C |
TPM - Capacitive
| Measuring range | 0.0 to 40.0 % TPM |
|---|---|
| Accuracy | *typically, based on Testo in-house reference, at an ambient temperature of 77 °F ±2 % TPM (104° to 374 °F) / ±2 % TPM (+40 to +190 °C) |
| Resolution | 0.5 % TPM (104° to 374 °F) / 0.5 % TPM (+40 to +190 °C) |
General technical data
| Operating humidity | 0 to +90 %rH |
|---|---|
| Weight | 9 oz. / 255 g |
| Reaction time | Approx. 30 sec |
| Dimensions | 6.7 x 2.0 x 11.8 in. ((LxWxH)) / 170 x 50 x 300 mm ((LxWxH)) |
| Operating temperature | 32° to 122 °F / 0 to +50 °C |
| Housing | ABS / ABS-PC fibre glass 10% |
| Protection class | IP65 |
| Product colour | white |
| Authorizations | CE 2014/30/EU |
| Length probe shaft | 6.89 in. / 175 mm |
| Length probe shaft tip | 1.378 in. / 35 mm |
| Diameter probe shaft | 0.433 in. / 11 mm |
| Diameter probe shaft tip | 0.394 in. / 10 mm |
| Alarm features | Upper and lower TPM limit value freely adjustable, visual alarm via 3-colour display backlighting (green, orange, red), values and illumination flash in the display until the measurement is ended (Auto Hold) |
| Battery type | 2 AAA batteries 1.5 V (LR03) |
| Battery life | at 68°F approx. 25 h continuous operation (corresponds to approx. 500 measurements ), without display lighting |
| Display type | LCD |
| Display size | 2 lines |
| Display ligthing | backlite |
| Storage temperature | -4° to 158 °F / -20 to +70 °C |
| Application temperature | 104° to 392 °F / +40 to +200 °C |
Temperature - NTC
| Measuring range | -58° to 482 °F / -50 to +250 °C |
|---|---|
| Accuracy | ±1 % of mv (Remaining Range) ±2 °F (-58° to -22.2 °F) / ±1 °C (-50.0 to -30.1 °C) ±0.9 °F (-22° to 211.8 °F) / ±0.5 °C (-30.0 to +99.9 °C) |
| Resolution | 0.1 °F / 0.1 °C |
| Reaction time | t99 = 10 sec (measured in moving liquid) |
Temperature - Infrared
| Measuring range | -22° to 482 °F / -30 to +250 °C |
|---|---|
| Accuracy | ±4.5 °F (-22° to -4.2 °F) / ±2.5 °C (-30 to -20.1 °C) ±3.6 °F (-4° to 31.8 °F) / ±2.0 °C (-20 to -0.1 °C) ±2.7 °F or ±1.5 % of mv (Remaining Range) / ±1.5 °C or ±1.5 % of mv (Remaining Range) |
| Measuring rate | 0.5 sec |
| Infrared resolution | 0.1 °F / 0.1 °C |
General technical data
| Weight | 7 oz. (incl. batteries) / 198 g (incl. batteries) |
|---|---|
| Dimensions | 11.1 x 1.9 x 0.9 in. (Probe folded out) / 281 x 48 x 23 mm (Probe folded out) 7.0 x 1.9 x 0.9 in. (probe folded away) / 178 x 48 x 23 mm (probe folded away) |
| Operating temperature | -4° to 122 °F / -20 to +50 °C |
| Protection class | IP65 |
| Length probe shaft tip | 1.26 in. / 32 mm |
| Diameter probe shaft | 0.118 in. / 3 mm |
| Diameter probe shaft tip | 0.098 in. / 2.5 mm |
| Housing | ABS / TPE / PC, diecast zinc, stainless steel |
| Length probe shaft | 4.173 in. / 106 mm |
| Product colour | white |
| Laser spot | on / off |
| Measurement value | Temperature °C / °F / °R |
| Measurement mode | Hold or auto hold (immersion probe) |
| Dimensions (probe folded out) | 281 x 48 x 23 mm |
| Dimensions (probe not folded out) | 178 x 48 x 23 mm |
| Standards | EN 13485 |
| Battery type | 2 AAA batteries |
| Battery life | 10 h at 25°C typical |
| Display type | LCD |
| Display size | one-line |
| Display function | with status line (°C,°F,°R, battery, hold/auto hold, min, max, laser, measurement, emissivity) |
| Display ligthing | illuminated |
| Storage temperature | -22° to 158 °F / -30 to +70 °C |
Accessories
Monitor Food Temperature: Incoming Goods, Transport & Storage
The temperature of food has a critical influence on product quality and consumer health. In order to ensure food safety and prevent the proliferation of germs, it is necessary to monitor food temperatures. During transport, upon receipt and throughout storage, make sure that cooling compliance is uninterrupted by using both infrared and core temperature measuring technology. The testo 104-IR infrared and penetration thermometer helps you do this. This instrument offers:
- Fast scanning of the goods delivered using infrared measuring technology
- Immediate inspection of critical values via fold-out penetration probe
- Fast and easy display of the measuring range via 2-point laser
- Durability and a waterproof housing
- HACCP-compliant measurement
- Recommendation certificate testo 270(pdf, 119.32 kB)
- Recommendation testo 270(pdf, 119.32 kB)
- HACCP Certificate Deep-frying Oil Tester(pdf, 205.84 kB)
- Data sheet testo 270(pdf, 259.46 kB)
- Trainingscard testo 270 Calibration and Adjustment(pdf, 435.51 kB)
- Trainingscard testo 270 Operation and Maintenance(pdf, 605.75 kB)
- Testo 104-IR Data Sheet(pdf, 533.8 kB)
- Short manual testo 270(pdf, 277.73 kB)
- EU declaration of conformity testo 104-IR(pdf, 31.83 kB)
- Instruction manual testo 104-IR(pdf, 1.34 MB)