logo
  1. Home
  2. testo 270

testo 270 - Cooking Oil Tester

0563 2750
$ 467.50
1
  • Oil quality assessment on site
  • Capacitive oil sensor from Testo, together with its needs-based design, make it possible to take measurements in hot oil (user is protected from the heat of the deep fat fryer)
  • Protection class IP65 for cleaning under running water
  • Measurement without consumables
  • On-site calibration using the reference oil
  • Ergonomic design means a safe grip
  • Reliably optimize the use of cooking oil to save costs and ensure brand protection. The testo 270 cooking oil tester quickly, easily, and reliably determines cooking oil quality. The new testo 270 cooking oil tester stands out thanks to its ergonomic design, which protects the hand from direct exposure to hot oil. The clear alarm via the colored backlit display makes it even easier to evaluate the cooking oil quality: Green means the TPM content is OK. Orange: TPM value is borderline. Red: Your TPM limit has been exceeded.
    The testo 270 cooking oil tester measures Total Polar Material (TPM) content in the oil and displays this as a percentage. As the oil is used, TPM increases. For every deep fried food, there is a point where overused oil will compromise the cooking oil quality and taste and presentation of that food. Measuring the %TPM level assures that the quality of the oil is optimized without fear of endangering the brand. In addition to this, a %TPM reading of greater than 24 can cause health concerns. Regular measurement with the testo 270 can prevent this. The use of the cooking oil tester also prevents changing the oil too soon, thus tossing away a very expensive commodity before you should. The TPM limit values can also be individually defined, and can, like other instrument configurations, be protected from inadvertent configuration changes by a PIN.

    testo 270 cooking oil tester in a case, with short instructions, full instruction manual and training card, as well as certificate of conformity and batteries

    Please note: Reference Oil for the testo 270 cooking oil tester is available separately (Part Number 0554 2650)

    Temperature - PTC

    Measuring range
    104° to 392 °F / +40 to +200 °C
    Accuracy
    ±2.7 °F / ±1.5 °C
    Resolution
    0.1 °F / 0.1 °C

    TPM - Capacitive

    Measuring range
    0.0 to 40.0 % TPM
    Accuracy
    *typically, based on Testo in-house reference, at an ambient temperature of 77 °F
    ±2 % TPM (104° to 374 °F) / ±2 % TPM (+40 to +190 °C)
    Resolution
    0.5 % TPM (104° to 374 °F) / 0.5 % TPM (+40 to +190 °C)

    General technical data

    Operating humidity
    0 to +90 %rH
    Weight
    9 oz. / 255 g
    Reaction time
    Approx. 30 sec
    Dimensions
    6.7 x 2.0 x 11.8 in. ((LxWxH)) / 170 x 50 x 300 mm ((LxWxH))
    Operating temperature
    32° to 122 °F / 0 to +50 °C
    Housing
    ABS / ABS-PC fibre glass 10%
    Protection class
    IP65
    Product colour
    white
    Authorizations
    CE 2014/30/EU
    Length probe shaft
    6.89 in. / 175 mm
    Length probe shaft tip
    1.378 in. / 35 mm
    Diameter probe shaft
    0.433 in. / 11 mm
    Diameter probe shaft tip
    0.394 in. / 10 mm
    Alarm features
    Upper and lower TPM limit value freely adjustable, visual alarm via 3-colour display backlighting (green, orange, red), values and illumination flash in the display until the measurement is ended (Auto Hold)
    Battery type
    2 AAA batteries 1.5 V (LR03)
    Battery life
    at 68°F approx. 25 h continuous operation (corresponds to approx. 500 measurements ), without display lighting
    Display type
    LCD
    Display size
    2 lines
    Display ligthing
    backlite
    Storage temperature
    -4° to 158 °F / -20 to +70 °C
    Application temperature
    104° to 392 °F / +40 to +200 °C

    Accessories