- Home
- CxHy replacement sensor
0393 0300
CxHy replacement sensor
0393 0300
CxHy replacement sensor
FOR TESTO 340 / 350 EMISSIONS ANALYZERS ONLY.
CxHy replacement sensor for flue gas measurement. A particularly practical feature: You can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.
The sensor is calibrated to methane from the factory. It can be calibrated to another gas by the user.
CxHy replacement sensor for flue gas measurement. A particularly practical feature: You can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.
The sensor is calibrated to methane from the factory. It can be calibrated to another gas by the user.
- Compatible with testo 340 and testo 350 Emissions Analyzers ONLY
- For the measurement of hydrocarbons (CH4 optimized)
- Simply change sensor yourself on site
- Pre-calibrated (adjusted to CH4 ex-works)
Methane (CH₄)
Propane (C₃H₈)
Butane (C₄H₁₀)
1 x CxHy replacement sensor.
Please note:
For one-off activation of the measurement parameter in the flue gas analyzer, you need the CxHy retrofit sensor. If the retrofit sensor has to be replaced, use the CxHy replacement sensor.
An O2 content in the flue gas of a least 2% is needed for measurement with the sensor.
Please note:
For one-off activation of the measurement parameter in the flue gas analyzer, you need the CxHy retrofit sensor. If the retrofit sensor has to be replaced, use the CxHy replacement sensor.
An O2 content in the flue gas of a least 2% is needed for measurement with the sensor.
