logo
  1. Home
  2. testo 435-2

testo 435-2 - マルチ環境計測器  (メモリ内蔵)

0563 4352
  • 各種プローブ(風速、温湿度、IAQ、照度など)を接続して、包括的な環境測定が可能
  • 最大10,000データを記録するメモリを搭載
  • 最小値、最大値、平均値の表示
  • 計測データの分析と記録のためのPCソフトウェア
  • この製品は販売終了となっております。後継製品をご覧ください。>> 製品ページへ
    testo 435-2を使用し、換気空調システムのチェックと調節、および室内空気品質の評価に必要なすべての計測を実行できます。
    ニーズに合わせてさまざまなオプションのプローブと組み合わせて、測定システムを構成することができます。本体をお求めの際にはプローブもご検討ください。
     

    室内空気品質のテストのための接続プローブ(オプション)

    • IAQ(室内空気品質)プローブ: 空気品質を評価するための CO2、気体温度、気体湿度、絶対圧の測定
    • 乱流度を計測する快適度プローブ: 対象の空間の微風を評価(EN 13779規格に適合)
    • 輻射熱温度プローブ: 放射熱の測定
    • 照度プローブ: 照度の計測
    • 温湿度プローブ: 対象の空間の温度の快適度の評価
    • 気体COプローブ: 建物内や室内のCOの測定
    • 浸漬、芯温、気体、表面の温度プローブ
    • HTC値特定用の温度センサ

     

    換気空調システム用の接続プローブ(オプション)

    • 熱線式風速プローブ: 換気ダクト内の風速と風量、温度の測定
    • ダクト内の温度と気体湿度も計測する場合は、湿度センサ内蔵のマルチプローブを推奨
    • 小型(直径16mm)のベーン式風速プローブ: 換気ダクト内の風速と風量の測定
    • 大型(直径100mm)のベーン式風速プローブ: 排気口での風量測定、testovent 417ファンネルと併用してディスクバルブおよび換気扇での測定、風量ストレーナーと併用して回転排気口での測定
    • 浸漬、芯温、気体、表面温度測定用の温度プローブ
    • 換気ダクト内での温度・湿度測定用プローブ
    • 絶対圧プローブ:クリーンルームなどの気圧測定
     

    環境測定業務に必要なプログラムを1台に集約

    testo 435-2を使用すると、複雑なプログラミングをしなくても、手軽に効果的な室内空気品質を測定することができます。
    接続プローブを自動認識し、関連メニューのみが表示されます。主なアプリケーションである「ダクト」または「標準(環境測定)」のユーザプロファイルを選択するだけで、操作ができるようになります。testo 435-2は10,000データのメモリを内蔵しており、USB経由でデータをPCに取り込むことができます。
    同梱のソフトウェアにより、「ダクト」測定などのプログラムごとにデータをツリー式の構造で分類して保存できます。保存データを文書化して測定依頼主へ提出することも可能です。また、現場でプリントをしてその場で依頼主へ渡したり、メモ代わりにプリントアウトができる、赤外線プリントもあります。
    testo 435-2は、測定値の他、最小値、最大値、平均値を同時表示できる機能を備えています。またディスプレイの周囲の外枠は、衝撃などから液晶部分保護するよう設計されています。持ち運びには、本体とセンサを収納できる、各種キャリングケースがあります。

    ご注意: プローブは別売です。測定器をお求めの際は別途プローブをお求めください。

    本体、ソフトウェア、USBケーブル、単3型乾電池×3、出荷検査書。

    一般テクニカルデータ

    質量
    428 g
    外形寸法
    220 x 74 x 46 mm
    動作温度
    -20 ~ +50 °C
    ハウジング
    プラスチック(ABS樹脂、TPE)、金属
    保護等級
    IP54
    バッテリの種類
    単3アルカリ電池
    バッテリ寿命
    約160時間
    ディスプレイバックライト
    Illuminated display
    保管温度
    -30 ~ +70 °C

    NTC

    測定範囲
    -50 ~ +150 °C
    精度
    ±0.2 °C (-25 ~ +74.9 °C)
    ±0.4 °C (-50 ~ -25.1 °C)
    測定値の 0.5% (その他の範囲)
    ±0.4 °C (+75 ~ +99.9 °C)
    分解能
    0.1 °C

    K熱電対(NiCr-Ni)

    測定範囲
    -200 ~ +1370 °C
    精度
    ±(0.2 °C + 測定値の 0.5%) (その他の範囲)
    ±0.3 °C (-60 ~ +60 °C)
    分解能
    0.1 °C

    快適度プローブ

  • 快適度プローブ
    Globe-Thermometer ~ 150 mm, TE Typ K, zum Messen der Strahlung
    K熱電対 - 黒球温度プローブ
      :
      0602 0743
      ¥88,000 ¥96,800
    • 気体プローブ

      浸漬/芯温プローブ

    • 浸漬/芯温プローブ
      Waterproof immersion/penetration probe, TC Type K
      K熱電対 防水型浸漬芯温プローブ
        :
        0602 1293
        ¥10,000 ¥11,000
      • 湿度プローブ

        表面温度プローブ

      • 表面温度プローブ
        Fast-action surface probe with sprung thermocouple strip
        K熱電対 高速応答表面温度プローブ
          :
          0602 0393
          ¥29,000 ¥31,900
        • 表面温度プローブ
          Pipe wrap probe for pipe diameter 5 to 65 mm
          K熱電対 パイプクランプ表面温度プローブ (Ø 5~65 mm)
            :
            0602 4592
            ¥31,000 ¥34,100
          • 表面温度プローブ
            Clamp probe for measurements on pipes
            K熱電対 パイプクランププローブ (Ø 15~25 mm)
              :
              0602 4692
              ¥15,000 ¥16,500
            • 表面温度プローブ
              Temperature probe to determine U-value, triple sensor system
              U値を決定する温度プローブ壁温度測定用トリプルセンサーシステムモデリング粘土を含む
                :
                0614 1635
                ¥45,000 ¥49,500
              • Certificates

                アクセサリ

                プリンタおよびアクセサリ

              • プリンタおよびアクセサリ
                testo-Schnelldrucker IRDA mit kabelloser Infrarot-Schnittstelle
                Testo 高速プリンタ IRDA
                  :
                  0554 0549
                  ¥52,000 ¥57,200
                • プリンタおよびアクセサリ
                  Spare thermal paper
                  プリンタ用スペア感熱紙 (不変色インキ使用)
                    :
                    0554 0568
                    ¥5,500 ¥6,050
                  • 測定器本体 / プローブアクセサリ

                  • 測定器本体 / プローブアクセサリ
                    Connection hose, silicone
                    差圧測定用シリコンチューブ 5 m
                      :
                      0554 0440
                      ¥9,000 ¥9,900
                    • 測定器本体 / プローブアクセサリ
                      Plug-in Power supply
                      プラグイン配電アダプター, 5VDC 500mA, 欧州対応アダプター付, 100-250VAC, 50~60Hz
                        :
                        0554 0447
                        ¥6,000 ¥6,600
                      • 測定器本体 / プローブアクセサリ
                        Connection hose
                        差圧測定用チューブ 5 m (シリコン不使用)
                          :
                          0554 0453
                          ¥10,000 ¥11,000
                        • 測定器本体 / プローブアクセサリ
                          Control and adjustment set for Testo humidity probes
                          制御および調整セット, testo湿度プローブ用, 食塩水(11.3% RHおよび75.3% RH), testo湿度プローブ用アダプター含む
                            :
                            0554 0660
                            ¥63,000 ¥69,300

                          • Measurement of indoor air quality (CO2)

                            Bad indoor air quality due to high concentrations of CO2 can cause tiredness, lack of concentration and even illness. Therefore, to ensure sufficient indoor air quality the CO2 concentration should generally not exceed 1 000 ppm. Values of 700 to 1 500 ppm can be viewed as the reference range.

                            The IAQ probe (order no. 0632 1535) is particularly suitable for monitoring indoor air quality controls. This probe can be used to record CO2 temperature and relative humidity at the same time.

                            Measurement of the air and surface temperature

                            For human beings to be comfortable and perform at their best, it is crucial that the rooms they occupy are correctly air conditioned. As well as the structural conditions and personal perception, the following factors also contribute significantly to the existence of a pleasant indoor climate: the indoor air and surface temperature of walls, windows, floors and ceilings.

                            There is a range of optional temperature probes available for the testo 435. Our temperature probes with a sprung cross-band sensor element for measurement on surfaces are outstanding. The sprung cross-band sensor element fits on any surface, taking the actual temperature of the measured object in just a few seconds (for example the fast-reaction surface probe, order no. 0602 0393).

                            In order to allow a fast measurement of air temperature, the temperature sensor is free in our air probes (e.g. precise, robust NTC probe 0613 1712). Immersion/penetration probes can also be used for measurements in air. However, the response time is then about 40 to 60 times higher than the indicated value which was measured in water.

                            Turbulence measurement

                            The air velocity in rooms directly affects thermal comfort. The turbulence and draught levels can be referred to in the assessment of comfort.

                            The level of turbulence indicates the air velocity fluctuation and intensity of air flow in a room.

                            The draught rate can be generally understood as the unwanted cooling of the body due to air movement. This is defined by the percentage of people who feel uncomfortable.

                            The non-directional comfort probe (order no. 0628 0109) has been specially designed to measure the turbulence level in accordance with EN 13779, and to assess the draught rate. In conjunction with our multi-functional measuring instrument testo 435, standard-compliant measurement results can be analyzed directly in the device.

                            Measurement of radiated heat

                            The multi-functional measuring instrument testo 435 is your reliable aid to measuring thermal comfort. The optional, attachable globe thermometer (order no. 0602 0743) enables measurement of radiated heat (that is, the operative or perceived temperature). The operative temperature measured with a Globe thermometer with a 150 mm diameter preferably corresponds with people's perceived temperature to ± 0.41 K.

                            The temperature measurements in a room (air temperature and operative temperature) are to be taken in the same place and same general conditions as the measurement of indoor air velocities.

                            CO measurement

                            Carbon monoxide (CO) is an odourless, invisible and tasteless gas, but also poisonous. It is produced during the incomplete combustion of substances containing carbon, such as coal, wood, oil, natural gas, etc., in heat sources and combustion engines. The CO concentration will increase quickly, particularly if there is not enough oxygen available. This may have adverse effects on health.

                            The ambient CO probe (order no. 0632 1235) and testo 435-1 are able to detect even the smallest quantities of CO in ambient air.

                            Measurement at the air outlet

                            Every duct inlet and outlet should only contain the volumetric flow that according to calculations is a basic prerequisite to an efficient functional system.

                            Large vane anemometers with 100 mm diameters are suitable for measuring the volumetric flows at duct outlets (order no. 0635 9435), as it integrates the flow velocity over a larger area thereby determining disturbance from the air grille (loop method).

                            To measure the suction or blowing vents of air grilles and poppet valves our volumetric flow rate funnel set is ideal (order no. 0563 4170) as is the large 100 mm vane anemometer (order no. 0635 9435) The entire volumetric flow is recorded with the aid of the funnel without the need for conversion on the basis of the flow velocity and area. This method of flow measurement is simple and reliable.

                            Lokalisierung von Schimmelbefall

                            Feuchtigkeit an Decken und Wänden kann Folge eines Bauschadens sein. Sie ist jedoch in den meisten Fällen Zeichen eines falschen Lüftungsverhaltens. Ist der Schimmel erst im Haus vermutet der Mieter zunächst, dass die Feuchtigkeit von außen kommt. Zahlreiche Rechtstreitigkeiten sind aufgrund der Fragestellung wer für Schimmelschäden haftet schon entbrannt. Es lässt sich nur schwer feststellen, wer bzw. was den Schimmel verursacht hat: der Bewohner oder eine mangelhafte Baukonstruktion?

                            Das testo 435-2/435-4 eignet sich ideal zur Messung der Feuchtigkeit an Decken und Wänden. Mit dem optional anschließbaren Temperatur-/Feuchtefühler (Best.Nr.: 0636 9735) und dem optionalen Temperatur-Oberflächenfühler (Best.Nr.: 0602 0393) berechnet das testo 435-2/435-4 automatisch den Taupunktabstand. Es liefert damit erste Hinweise darüber, ob Schimmel durch Kondensation oder durch eindringende Feuchte aufgrund eines Bauschadens oder fehlerhafter Isolierung entsteht.

                            Mit der mitgelieferten PC-Software können die Messdaten dokumentiert und analysiert werden.

                            U-value measurement

                            Then redeveloping or renovating old buildings, it is crucial to be able to determine quickly if heat is being lost through the windows and walls. Only then can energy costs be reduced and redevelopment measures carried out efficiently.

                            When assessing thermal transmission, e.g. in old buildings in need of renovation, the U-value is one of the most important values. It enables thermal assessment, e.g. leaks or the smallest air flows at windows.

                            3 temperature values are required for calculating the U-value:

                            • Outside temperature
                            • Surface temperature of the internal wall
                            • Indoor air temperature

                            A radio probe is needed to determine the U-value (order number: 0614 1635); this is placed in position outside. It transmits the readings to the measuring instrument inside. To measure the surface temperature the three wires of the U-value probe are attached to the wall with plasticine. The air temperature is recorded by a sensor located on the probe plug. The measuring instrument testo 435-2 automatically calculates the U-value from the three values and shows this on the display. The advantage: there is no need for manual calculation; the result is quick and accurate.

                            In short, the testo 435-2 allows you to calculate the U-value quickly and accurately, as well as measure parameters for air conditioning, ventilation, and indoor air quality.

                            Lighting measurement

                            Suitable lighting in the workplace provides workers with sufficient light to be able to perform their jobs well. It helps to prevent mistakes being made, premature tiredness setting in, and maintains alertness.

                            testo 435-2 and the Lux probe (order no. 0635 0545) can be used to measure and assess luminous intensity (natural or artificial light).

                            Flow measurement in the ventilation duct using a thermal anemometer and vane anemometer

                            TTesto offers compact anemometer probes and pitot tubes for measuring the flow and volumetric flow in the ventilation duct.

                            Selecting a suitable probe or measuring instrument depends on the flow velocity in the ventilation duct. This can be broken down into three sub-ranges:

                            • Low flow velocities: 0 to 5 m/s => thermal anemometers and thermal probes are suitable for this (order no. 0635 1535, 0635 1025)
                            • Medium flow velocities: 5 to 40 m/s => best results are achieved by the 16 mm vane anemometer und Flügelrad-Sonden (order no. 0635 9535)
                            • High flow velocities: 40 70 100 m/s => the pitot tube provides the best prerequisites (see following application)

                            The flow sensors for duct measurement are all equipped with telescopes making them easy to use in large air ducts. Air temperature and humidity can also be measured with the same probe as the flow velocity if required. According to the required application, choose between a thermal probe, vane probe or pitot tube for measuring the flow measurement in the duct.