- Unieke LongLife sensoren welke tot maar liefst 6 jaar meegaan
- Standaard 5 jaar garantie op het instrument en de meetcellen
- Meetbereik t/m 30.000 ppm CO dankzij de automatische verdunning
Gewicht | 720 g (zonder accu) |
---|---|
Afmetingen | 270 x 160 x 57 mm |
Bedrijfstemperatuur | -5 tot +45 °C |
batterij | Accu 3,7 V / 2,6 Ah; Netadapter 6 V / 1,2 A (optie) |
systeem voorwaarden | vereist iOS 7.1 of nieuwer; vereist Android 4.3 of nieuwer; vereist mobiel eindapparaat met Bluetooth 4.0 |
maximum | 500.000 meetwaarden |
Opslagtemperatuur | -20 tot +50 °C |
Meetbereik | 0 tot 300 hPa |
---|---|
Nauwkeurigheid | ±1 % v. Mw. (+50,1 tot +100,0 hPa) ±0,5 hPa (0,0 tot +50,0 hPa) ±1,5 % v. Mw. (overig meetbereik) |
Resolutie | 0,1 hPa |
Meetbereik | 0 tot 21 vol.% |
---|---|
Nauwkeurigheid | ±0,2 vol.% |
Resolutie | 0,1 vol.% |
You can use the testo 330i flue gas analyzer to check the gas supply on gas boilers. You can therefore measure gas flow pressure and gas resting pressure in order to ensure that the system can be commissioned. You can also use the data specified by the manufacturer for the nozzle pressure to tailor the appliance output to the heat requirement.
The testo 330i is equipped with two long-life sensors for measuring O2 and CO and can optionally be upgraded with an NO sensor. Flue gas and draught are measured in parallel, so all relevant flue gas parameters are displayed simultaneously on the smartphone.
In balanced flue systems, you can use the testo 330i flue gas analyzer to check whether there is a leak in the flue gas system. Measure the O2 content of the combustion air in the dual wall clearance to ensure that no flue gas is getting into the combustion air supply, thus preventing damage due to condensate or impairment of the combustion process.