testo Saveris 2-T3 - Wi-Fi data logger with 2 external TC temperature probe connections

Order-Nr. 0572 2033

This meter uses a sensor to start up. Click here for probe selection.

Where to buy

Alerts when limit values are exceeded via e-mail or SMS (optional)
Broad measuring range of -195 to +1350 °C possible thanks to connectable probes (optional)
Access to readings anywhere and with any device
Data transfer by wireless LAN
Automatic reading documentation
Free online data storage in the cloud

The testo Saveris 2-T3 Wi-Fi temperature data logger reliably measures and records temperature values, with up to two plug-in thermocouple probe channels (Type K, J, or T). When used with the testo Cloud service, measurements are available anytime, anywhere, via an internet connected device, such as a tablet, PC, or smart phone. Viewing your data is as simple as registering your data logger on your testo Cloud account.

Alerting of violation of limit values by e-mail or SMS.

Climatic ambient conditions easily under control
Go to system overview

Details

Product Description

The testo Saveris 2-T3 Wi-Fi data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature values. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-T3 with up to 2 connectable TC temperature probes (types K, T, J), stores all measured temperature values, and transmits them directly by Wi-Fi to the testo Cloud. Supported by an extensive offering of thermocouple probe choices, the testo Saveris 2-T3 Wi-Fi logger handles a broad range of applications. The measurement rate is adjustable from 1 minute to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.

Installation, readout, and analysis of Wi-Fi data loggers

The testo Saveris 2-T3 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.

The logger itself displays the current measurement values, alarm conditions, and the remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type.

Delivery Scope

- testo Saveris 2-T3 Wi-Fi data logger
- Micro USB cable
- Wall bracket with lock
- Batteries (4 AA)
- Instruction manual
- Factory calibration document

Technical Data

Temperature - Type K TC
Measuring range	-319° to 2462 °F / -195 to +1350 °C
Accuracy	±(0.9 + 0.5 % of mv) °F / ±(0.5 + 0.5 % of mv) °C
Resolution	0.1 °F / 0.1 °C

Temperature - TC Type T (Cu-CuNi)
Measuring range	-328° to 752 °F / -200 to +400 °C
Accuracy	±(0.9 + 0.5 % of mv) °F / ±(0.5 + 0.5 % of mv) °C
Resolution	0.1 °F / 0.1 °C

Temperature - Type J TC
Measuring range	-148° to 1382 °F / -100 to +750 °C
Accuracy	±(0.9 + 0.5 % of mv) °F / ±(0.5 + 0.5 % of mv) °C
Resolution	0.1 °F / 0.1 °C

General technical data
Weight	240
Dimensions	4 x 3 x 1.2 in. / 95 x 75 x 30.5 mm
Operating temperature	-22° to 122 °F / -30 to +50 °C
Protection class	IP54
Measuring rate	Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h
Door contact	no
Communication rate	Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h
WLAN Connectivity	Signal transmission: wireless, frequency band: 2.4 GHz, supported wireless LAN standards: IEEE 802.11 b/g/n and IEEE 802.1X; Possible encryption methods: without encryption, WEP, WPA, WPA2, WPA2 Enterprise - The data loggers communicate via the standard protocol MQTT and are SNTP time synchronization-capable.
Connection external	External temperature probes
Power supply	4 x AA AlMn batteries; mains unit optional; for temperatures below -10 °C please use Energizer batteries 0515 0572
Memory	10,000 measurement values / channel
Battery life	12 months (typical value, depending on the wireless LAN infrastructure) at +25 °C, 15-minute measuring cycle and standard communication cycle at -30 °C, 15-minute measuring cycle and standard communication cycle with Energizer batteries 0515 0572
Storage temperature	-40° to 158 °F (without batteries) / -40 to +70 °C (without batteries)