Our flexible flue gas probe helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).

The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 &deg;C.

The flue gas probe from Testo makes it possible to carry out efficient flue gas measurements on industrial engines. In the case of diesel engines, the permanently welded-on preliminary filter provides protection from diesel particulates. It can be used at flue gas temperatures of up to 1,000 &deg;C.

Ideal for official emission measurement (compliance testing): the heated industrial probe kit comprises a heated probe shaft up to 600°C flue gas temperature, a heated gas sampling hose (length 4 m) and a thermocouple type K – this means you are ideally equipped.

Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.

Ideal for the extractive sampling of flue gas at high flue gas temperatures, e.g. in glass and steel production. The industrial probe kit 1800°C comprises a handle, a probe shaft up to 1800°C flue gas temperature and a 4 m long gas sampling hose, including inline filter (all three unheated).

Modular flue gas probe with 300 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

T&Uuml;V-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 335 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 700 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

T&Uuml;V-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

Modular flue gas probe with 180 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

Namestitvena in vzdrževalna dela na ogrevalnih sistemih opravljate večkrat na dan ob uporabi naprave za analizo dimnih plinov z dolgotrajnimi senzorji. T&Uuml;V-testirani testo 300 dolgotrajna naprava za analizo dimnih plinov se dostavlja z O2 in CO H2senzorjem, ki prepozna do 30.000 ppm (NO - možna vnovična nastavitev), T&Uuml;V-testirana modularna sonda za dimne pline, testo Bluetooth&reg; konektor, kovček in praktična dodatna oprema. 
&nbsp;

Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The T&Uuml;V-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm (NO - can be retrofitted), T&Uuml;V-tested modular flue gas probe, testo Bluetooth&reg; printer, testo Bluetooth&reg; Connector, case and practical accessories.

Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The T&Uuml;V-tested testo 300 NEXT LEVEL Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 30,000 ppm (NO - can be retrofitted), T&Uuml;V-tested modular flue gas probe, testo Bluetooth&reg; Connector, testo Bluetooth&reg; printer, case and practical accessories.

Namestitvena in vzdrževalna dela na ogrevalnih sistemih opravljate večkrat na dan ob uporabi naprave za analizo dimnih plinov z dolgotrajnimi senzorji. T&Uuml;V-testirani testo 300 dolgotrajna naprava za analizo dimnih plinov se dostavlja z O2 in CO H2senzorjem, ki prepozna do 8.000 ppm (NO - možna vnovična nastavitev), T&Uuml;V-testirana modularna sonda za dimne pline, testo Bluetooth&reg; konektor, kovček in praktična dodatna oprema.

The testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.

Everything you need to carry out efficient servicing and commissioning of heating systems using the testo 330i flue gas analyzer &ndash; in one compact set.

For user-friendly measurements: The 2.8 m long extension hose can be connected between the measuring instrument and the appropriate probe.

General technical data	Product-/housing material Plastic
	Cable length 2,8 m
	Product colour Black
	Weight 322 g

kompetenca@optimum

Hose extension - Probe-instrument extension hose (length 2.8 m)

Hose extension - Probe-instrument extension hose (length 2.8 m)

General technical data

General technical data