- 0-40 in. H2O pressure measurement range
- Temperature compensated pressure sensor
- Magnetic backing for hands free use
- Air flow measurement with optional pitot tube
- User adjustable air density compensation
- Protective cap for safe storage
Directly from the manufacturer
Free shipping
Fast delivery
Secure payment
Directly from the manufacturer
- Home
- testo 510
0563 0510
testo 510 - Digital manometer
0563 0510
testo 510 - Digital manometer
With the testo 510, performing system tests has never been easier using our single, easy to use, rugged, compact digital manometer. Its small form factor, bright backlit display, and magnetic backing will enable the 510 to be used in a wide variety of applications.
- Pocket-sized temperature-compensated differential pressure measurement
- Illuminated display
- Magnets on the rear allow hands-free work
- 50 hours of battery life
- 10 selectable units
- Flow measurement possible with a Pitot tube (available as an option)
Customers who viewed this product also viewed
General technical data
General technical data | Dimensions 5 x 2 x 1 in. / 119 x 46 x 25 mm |
|---|---|
Operating temperature 32.0° to 122.0 °F / 0 to +50 °C | |
Protection class IP40 | |
Seceltable units hPa, mbar, Pa, mmH2O, inH₂O, inHg, mmHg, psi, m/s, fpm | |
Maximal static pressure 7.252 psi / 500 mbar | |
Measuring rate 0.5 sec | |
Battery type 2 AAA batteries | |
Battery life 50 h (average, without display illumination) | |
Storage temperature -40.0° to 158.0 °F / -40 to +70 °C | |
Weight 3 oz. (with batteries and protective cap) / 90 g (with batteries and protective cap) | |
Differential Pressure
Differential Pressure | Measuring range 0 to 40 InH₂O / 0 to 100 hPa |
|---|---|
Accuracy ±0.02 InH₂O (0.12 to 0.40 InH₂O) / ±0.05 hPa (0.31 to 1.00 hPa) ±0.01 InH₂O (0 to 0.12 InH₂O) / ±0.03 hPa (0 to 0.30 hPa) ±(0.0 InH₂O + 1.5 % of mv) (0.40 to 40 InH₂O) / ±(0.1 hPa + 1.5 % of mv) (1.01 to 100 hPa) | |
Resolution 0.00 InH₂O / 0.01 hPa | |
testo 510, belt pouch, 2 hoses, wrist strap, certificate of conformity
Pitot tubes
Pocket-sized differential pressure measurement
For quick jobs: Stow the compact differential pressure measuring instrument with clip-on protective cap in your shirt or trouser pocket or in the belt holder included in delivery. That way you always have it ready to hand for measurements on water and VAC systems!
Differential pressure measurement on filters
Air conditioning systems are equipped with filters which prevent dirt from the outside air entering the indoor air. These filters are to be inspected regularly to make sure they are still fully functional. To do this, the pressure is measured in front of and behind the filter. The result is the differential pressure. If it is too high, the filter is contaminated and needs changing.
The testo 510 measures differential pressures in a range of 0 - 100 hPa. The differential pressure measurement is temperature-compensated for exact readings. The readings can be displayed in pascal over the entire measuring range. Magnets on the rear of the instrument allow hands-free work.
Measurement in ventilation ducts
Observance of air flows in the ventilation duct is of utmost importance for the function of the ventilation and air conditioning system. If the air flows are smaller than intended, the removal of room loads (heating, cooling and substance loads) may not be ensured in certain circumstances.
Therefore, the most accurate recording of air flows as possible is particularly important.
In conjunction with a pitot tube, testo 510 measures the air velocity in the range of 2 to 100 m/s. Magnets on the rear of the instrument allow hands-free work.
Therefore, the most accurate recording of air flows as possible is particularly important.
In conjunction with a pitot tube, testo 510 measures the air velocity in the range of 2 to 100 m/s. Magnets on the rear of the instrument allow hands-free work.