Pitot tube, 3.3 ft - stainless steel

Order-Nr. 0632 3340

• Flue gas analysis with up to 4 gas sensors - freely configurable with sensor change on site by the user
• testo 340 flue gas analyzer, calibration protocol, shoulder strap, O₂ sensor and integrated flow and pressure difference measurements   

Order-Nr. 400563 3342

• Flue gas analysis with up to 4 gas sensors - freely configurable with sensor change on site by the user
• Optimize the combustion process and increasing fuel efficiency

Order-Nr. 400563 3343

• Flue gas analysis with up to 4 gas sensors - freely configurable with sensor change on site by the user
• For combustion tuning IC engines (spark-Ignited rich and lean burn and compression-ignited diesel engines)

Order-Nr. 0632 3510

• Flue gas analysis with up to 6 gas sensors - freely configurable with sensor change on site by the user
• Increased measurement range for unlimited measurements even when gas concentrations are higher

Order-Nr. 0632 3511

• Flue gas analysis with up to 6 gas sensors - freely configurable with sensor change on site by the user
• testo 350 Analysis Box just as easy to use when not positioned at measurement site

Order-Nr. 400563 3512

• Optimize fuel efficiency and reduce emissions
• Identify and troubleshoot bad burners, inlet air, or fuel delivery problems

Order-Nr. 400563 3513

• For EPA Emissions Compliance testing – EPA test methods OTM 39, OTM 38, 7E, CTM-030, CTM-034, ASTM D6522, SCAQMD 1110.2, SCAQMD 1146.  Its also used for state, local and company testing.
• For combustion tuning IC engines (spark-Ignited rich and lean burn and compression-ignited diesel engines)

Order-Nr. 400563 3514

• Measures Low NOx (NO + NO2 with 0.1 ppm) Low CO (0.1 ppm), O2, on EPA dry basis
• Confirm emissions baseline and permit status

Order-Nr. 0563 4200

• Volume flow hood weighing less than 6.4 lbs
• Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity

Order-Nr. 0560 0420

• Differential pressure measurement, useful for checking filters in air conditioning and ventilation systems
• Calculate flow velocity and volume flow using an optional pitot tube

Order-Nr. 0560 5126

• 8 measurement units to choose from: psi, kPa, hPa, Pa, mmH₂O, mmHg, inH₂O, inHg
• 2 air flow units to select from: fpm, m/s

Order-Nr. 0560 5127

• 8 measurement units to choose from: psi, kPa, hPa, Pa, mmH₂O, mmHg, inH₂O, inHg
• 2 air flow units to select from: fpm, m/s

Order-Nr. 0560 5128

• 8 measurement units to choose from: psi, kPa, hPa, Pa, mmH₂O, mmHg, inH₂O, inHg
• 2 air flow units to select from: fpm, m/s

Order-Nr. 0560 5129

• 7 pressure units to choose from: psi, kPa, hPa, mmH₂O, mmHg, inH₂O, inHg
• Large measuring range up to 2000 hPa

Order-Nr. 0560 5210

• Integrated differential pressure sensor with an accuracy of 0.2 % of f.v.
• Calculation of the flow velocity and the volume flow via Pitot tube (optional)

Order-Nr. 0560 5211

• Integrated differential pressure sensor with an accuracy of 0.1% of f.v.
• Calculation of flow velocity and volume flow via pitot tube (optional)

Order-Nr. 0635 2045

• For measuring flow velocity
• Ideal for high flow velocities and heavily contaminated flow

Order-Nr. 0635 2145

• For measuring flow velocity
• Ideal for high flow velocities and heavily contaminated flow

Order-Nr. 0635 2345

• For measuring flow velocity
• Ideal for high flow velocities and heavily contaminated flow

Order-Nr. 0638 1347

Order-Nr. 0638 1447

Order-Nr. 0638 1547