logo
  1. Home
  2. testo 340

testo 340 - Combustion Analyzer for Commercial and Industrial Applications

0632 3340
  • Flue gas analysis with up to 4 gas sensors - freely configurable with sensor change on site by the user
  • testo 340 flue gas analyzer, calibration protocol, shoulder strap, O2 sensor and integrated flow and pressure difference measurements   
  • Can measure CO, COlow, NO, NOlow, NO2 or SO2
  • Industrial use design
  • Measuring range extension even with high gas concentrations
  • Measurement data management on PC or notebook
  • The testo 340 standard kit includes the 340 portable 4-gas analyzer with O2 and CO sensors, transport case, power supply/rechargers, pack of 10 particle filters, 12" probe, 5/16" diameter, 7' Teflon hose assembly TMAX = 932 °F.
     
    Testo 340s are sold through our Authorized Emissions Distributors network.  Please contact Testo to find your local distributor.
    The testo 340 is the ideal tool to confirm proper set-up and to identify emission problems before they get serious.  Oxygen is the base sensor in all Testo 340 Analyzers.  Simply add one, or up to three sensors for your specific job.
     
    This combustion analyzer can be configured in many ways for commissioning commercial boilers, testing engines in midstream gas pipelines, tuning industrial burners in refineries, or cement or glass or any other combustion system that requires high confidence, so you can make the proper control adjustments.
     

    Four (4) gas flexibility – O2 comes standard, then choose what’s needed for your combustion tuning

    Select the industrial CO sensors (0-10,000 ppm with a 50,000 ppm upper dilution range) for tuning standard systems or swap out and use the CO low range sensor (0-500 ppm) for critical low range carbon monoxide limits.  Add the NO and NO2 sensors for a NOx reading for tuning boilers or engines.  You can even field swap the standard NO sensor for the NOlow sensor and have 0.1 ppm NOx resolution for tighter combustion control.  Add the SO2 sensor to monitor sulfur laden fuels or additives.   We have a variety of kits configured for specific combustion tuning applications.   The analyzer Kits are configured to deliver the best performance whether you are testing a boiler or burner, stationary or mobile engine tuning, or pre-compliance testing.
     

    Analyzer Kits - 4 Configured for typical combustion needs

    • Two gas: (O2, CO) standard combustion kit
    • Three gas: (O2, CO, NO) combustion kit for Boilers & Burners
    • Three gas: (O2, CO, NO) Engine Testing Kit
    • Single gas upgrade with O2 - Add what you need.

    Built to last

    • Long life-time CO and NOx sensors (up to 5 years) make cost of ownership the best in market.  Field exchangeable sensors allow greater flexibility.
    • The automatic dilution (range extender) factor-5x increases the CO range to 50,000 ppm.  The analyzer will calculate and display the corrected values.  User defined setpoints means you can extend the CO sensor life and maintain accurate measurements.
    • Rubberized shock resistant housing and clear over-plate protects analyzer and display screen. Magnets on back housing allows you to mount the analyzer for easier viewing.

    Beneficial features and useful options

    • The back-lit display is easily customized, can display from 4 to 8 lines, or show a variety of measurement options, such as PPM values or as MMBtu/hr. shows measurements
    • Important calculation including, combustion efficiency, excess air calculations, corrected NOx and corrected CO values.  
    • 18 fuels to choose from
    • Onboard Diagnostics – Simple Push the I button and scroll down to see instrument status.
    • Draft and differential pressure and Mass Emission calculations (i.e. lbs./hr., tons/yr) with any Pitot tube
    • Options:
       
      • Hose extensions -9-foot quick connect extensions with integrated thermocouple means you can extend the hose to 25 feet.  Simply disconnect them for easier, less bulky transport.
      • Industrial sample probes from 3 feet to 9 feet long and from 1,112 °F to 3,200 °F
      • Infrared printer
      • easyEmission Software - for real time data loggong or downloading from instrument memory
     

    testo 340 flue gas analyzer, calibration certificate, shoulder strap, O2 sensor, and integrated flow and pressure difference measurements.
    PLEASE NOTE: Your testo 340 must be fitted with a second gas sensor for it to work. Up to three additional sensors can be fitted.

    Differential Pressure

    Measuring range
    -80 to 80 InHâ‚‚O / -200 to 200 hPa
    Accuracy
    ±1.5 % of mv (Remaining Range)
    ±0.2 InH₂O (-20.0 to 20.0 InH₂O) / ±0.5 hPa (-49.9 to 49.9 hPa)
    Resolution
    0.0 InHâ‚‚O / 0.1 hPa

    Absolute Pressure

    Measuring range
    +240 to +460 InHâ‚‚O / +600 to +1150 hPa
    Accuracy
    ±4 InH₂O / ±10 hPa
    Resolution
    1 InHâ‚‚O / 1 hPa

    Flue gas Oâ‚‚

    Measuring range
    0 to 25 Vol.%
    Accuracy
    ±0.2 Vol.%
    Resolution
    0.01 Vol.%
    Reaction time t₉₀
    < 20 sec

    Engine Probes

    Flue gas probes

    Industrial probes

    Pitot tubes

    Temperature probes

  • Temperature probes
    Mini ambient air probe
    Mini ambient air probe
      :
      0600 3692
      $ 81.60
      1
    • Temperature probes
      Combustion air temperatur probe
      Combustion air temperature probe, immersion depth 60 mm
        :
        0600 9797
        $ 151.30
        1