-
Spare pH probe for pH/temperature measuring instrument
Order-Nr. 0650 2051
With the spare pH probe, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.-
Spare pH probe for pH/temperature measuring instrument
-
Easy change of measuring tip
ZAR 3 278.00excl. VAT -
-
Spare pH probe pH2 for pH/temperature measuring instrument
Order-Nr. 0650 2062
With the spare pH probe pH2, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.-
Spare pH probe pH2 for pH/temperature measuring instrument
-
Easy change of measuring tip
ZAR 3 146.00excl. VAT -
-
Spare thermal paper for printer
Order-Nr. 0554 0568
The spare permanent thermal paper is ideal for printouts with the appropriate printers.-
Permanent thermal paper
-
6 rolls
ZAR 528.00excl. VAT -
-
Connection hose, silicone
Order-Nr. 0554 0440
Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).-
For the connection of Pitot tube and pressure probe
-
Length of 5 m
ZAR 836.00excl. VAT -
-
Battery, 3.6 V/1.9 Ah 1AA
Order-Nr. 0515 0177
Battery, 3.6 V/1.9 Ah 1AA-
Lithium mignon battery (AA)
ZAR 770.00excl. VAT -
-
-
Spare dirt filters (20 off)
Order-Nr. 0554 3381
The spare dirt filter protects your analyzer unit against dirt.-
Reliable protection against dirt particles
-
20 off
ZAR 1 078.00excl. VAT -
-
Freeze-drying probe holder (puck) - Lyophilization probe holder
Order-Nr. 0554 1907
The probe holder ensures precise measurement of the surface temperature in a freeze-drying system. To do this, secure the data logger's flexible temperature probe in the slot of the probe holder. The weight of the probe holder ensures that the temperature probe is in direct contact with the surface.-
Probe holder for precise measurement of the surface temperature (plate temperature)
-
Enables direct contact with the surface – the ambient air has no influence on the measurement result
Price on Request -
-
Sintered PTFE filter, Ø 12 mm, for corrosive media
Order-Nr. 0554 0756
Sintered PTFE filter, Ø 12 mm, for corrosive mediaZAR 968.00excl. VAT -
Reflectors, self-adhesive (1 pack = 5 off, each 150 mm long)
Order-Nr. 0554 0493
Reflectors, self-adhesive (1 pack = 5 off, each 150 mm long)ZAR 462.00excl. VAT -
Emission tape - for measurements on reflective surfaces
Order-Nr. 0554 0051
Use the emission tape when you are using your thermal imager to measure on reflective surfaces, for example metal.-
Tape for measurements on reflective surfaces
-
Temperature-resistant up to +250 °C
-
Emissivity (ɛ) of 0.95
ZAR 1 606.00excl. VAT -
-
CO replacement filter for sensor
Order-Nr. 0554 4100
Cross sensitivity to NO and SO2 is blocked by the CO sensor replacement filter during flue gas analysis.-
Exchangeable probe for CO sensor
-
Blocks cross sensitivity to NO and SO2
ZAR 1 768.00excl. VAT -
-
Spare dirt filters (10 off) - for condensate trap in the gas sampling hose and measuring range extension
Order-Nr. 0554 3371
The spare dirt filter enables you to reliably protect the condensate trap in the gas sampling hose and measuring range extension (gas dilution) against dirt.-
Reliable protection against dirt particles
-
10 off
ZAR 726.00excl. VAT -
-
Spare sintered filters (2 off)
Order-Nr. 0554 3372
The spare sintered filter enables you to replace your probe’s pre-filter without any problem.-
For replacing the probe pre-filter
-
Ideal for measuring flue gases with a high dust content
-
Protects against damage caused by dust
ZAR 1 586.00excl. VAT -
-
NO replacement filter for sensor
Order-Nr. 0554 4150
Cross sensitivity to SO2 is blocked by the NO sensor replacement filter during flue gas analysis.-
Exchangeable probe for NO sensor
-
Blocks cross sensitivity to SO2
ZAR 1 950.00excl. VAT -
-
Spare soot filter paper; 8 paper rolls
Order-Nr. 0554 0146
Spare soot filter paper; 8 paper rollsZAR 462.00excl. VAT -
Probe shaft, length 335 mm, incl. cone, Ø 8 mm, Tmax 1000 °C
Order-Nr. 0554 8764
The probe shaft with integrated thermocouple enables temperature measurements up to 1000°C. The quick-change click system enables the probe shaft to be fixed onto the appropriate handle really easily.-
Easy probe shaft change via quick-change click system
-
For temperature measurements up to 1000°C
-
Length of 335 mm
ZAR 6 396.00excl. VAT -
-
Filter paper to determine smoke number; 40 strips for approx...
Order-Nr. 0554 0308
Filter paper to determine smoke number; 40 strips for approx; 200 measurementsZAR 147.40excl. VAT -
Probe shaft, length 700 mm, incl. cone, Ø 8 mm, Tmax. 1000 °...
Order-Nr. 0554 8765
The probe shaft with integrated thermocouple enables temperature measurements up to 1000°C. The quick-change click system enables the probe shaft to be fixed onto the appropriate handle really easily.-
Easy probe shaft change via quick-change click system
-
For temperature measurements up to 1000°C
-
Length of 700 mm
ZAR 8 892.00excl. VAT -
-
Button cell battery (LR44)
Order-Nr. 0515 0032
Button cell battery (LR44) with a voltage of 1.5 volts.-
4 button cell batteries (LR44)
ZAR 136.40excl. VAT -
38 Products found