- Home
- testo 440 CO₂ Kit with Bluetooth®
0563 4405
testo 440 CO2-set met Bluetooth®
0563 4405
testo 440 CO2-set met Bluetooth®
Set ter beoordeling van de binnenluchtkwaliteit (Indoor Air Quality). Veilig opgeborgen in de koffer krijgt u het klimaat-meetinstrument testo 440 en de CO2-sonde met Bluetooth incl. temperatuur- en vochtsensor. Zo kunt u direct aan de slag!
- Eén meetinstrument voor alle klimaatrelevante parameters
- Intuïtief: helder gestructureerd meetmenu voor langetermijnmeting en parallelle bepaling van de CO2-concentratie, luchtvochtigheid en luchttemperatuur in gesloten ruimtes
- Nauwkeurig: absolute druk-compensatie, berekening van natteboltemperatuur, dauwpunt en absolute vochtigheid
- Uitbreidbaar met groot assortiment aan sondes
- Draadloze meting met bluetooth-sondes
- USB-interface voor het exporteren van de meetrapporten als CSV-bestand
NTC
Type K (NiCr-Ni)
Algemene technische gegevens
NTC
Vochtigheid - capacitief
Absolute druk
CO₂-omgevingsmeting
Algemene technische gegevens
testo 440 klimaat-meetinstrument, 3 x mignon-batterijen type AA, USB-kabel en kalibratieprotocol (0560 4401)
CO2-sonde* met Bluetooth incl. temperatuur- en vochtsensor (bestaande uit CO2-sondekop en Bluetooth-handgreep); 4 x AA-batterijen, tafelstatief en kalibratieprotocol (0632 1551)
Basiskoffer voor testo 440 en 1 sonde
* Gebruik de sonde niet in een bedauwende atmosfeer. Voor de continue inzet in omgevingen met een hoge vochtigheid
>80 % RV bij <30 °C gedurende > 12 h
>60 % RV bij <30 °C gedurende > 12 h
CO2-sonde* met Bluetooth incl. temperatuur- en vochtsensor (bestaande uit CO2-sondekop en Bluetooth-handgreep); 4 x AA-batterijen, tafelstatief en kalibratieprotocol (0632 1551)
Basiskoffer voor testo 440 en 1 sonde
* Gebruik de sonde niet in een bedauwende atmosfeer. Voor de continue inzet in omgevingen met een hoge vochtigheid
>80 % RV bij <30 °C gedurende > 12 h
>60 % RV bij <30 °C gedurende > 12 h
Behaagelijkheidssonde
Druksonde
Levensmiddelenvoeler
Luchtsnelheidsonde
Oppervlaktevoeler
Vochtvoeler
temperatuurvoeler
Sets
Long-term monitoring of indoor air quality
Poor indoor air quality due to excessive concentrations of CO2 can cause tiredness, lack of concentration and even illness. With its menu for recording readings, the testo 440 air velocity and IAQ measuring instrument is ideal for monitoring the indoor air quality. Enter the measurement time and the measuring cycle – and, for example, track the change in CO2 concentration or humidity and temperature values over the course of the day. Simply choose between probes with Bluetooth or fixed cable for CO2, CO or humidity (please order probes that are not included in the kit separately).
Turbulence measurement in accordance with EN ISO 7730 / ASHRAE 55
Determine the degree of turbulence and the draught risk in the workplace: draught restricts the comfort level and is the most common cause of complaints about the indoor climate. The turbulence probe (please order separately) measures air velocity and air temperature, and automatically calculates the draught risk and the degree of turbulence in accordance with EN ISO 7730/ASHRAE 55.
For convenient measurements at varying heights, we recommend using our measuring tripod for comfort level measurement (please order separately). This makes it very easy to position turbulence probes in compliance with the standards.
For convenient measurements at varying heights, we recommend using our measuring tripod for comfort level measurement (please order separately). This makes it very easy to position turbulence probes in compliance with the standards.
Convenience and maximum flexibility for duct and outlet measurements
With our large range of air velocity probes (please order separately), you can carry out simple and convenient measurements even at locations that are difficult to access in ventilation ducts or at air outlets:
you will even find it easy to carry out measurements in particularly large ducts. This is because the extendable telescope on the hot wire and vane probe (Ø 16 mm) with universal handle can be further extended using the telescope extension – enabling you to attain a total length of 2 metres.
Carry out measurements at air/ceiling outlets effortlessly and without using a ladder. Fit your vane probe (Ø 100 mm) with the telescope with 90° angle and, if necessary, with the telescope extension (both can be ordered separately).
Greater freedom thanks to Bluetooth: the air velocity probes with Bluetooth have no inconvenient cable connection to the measuring instrument, and they transmit readings up to a distance of 20 m. Press the button on the probe to operate the measuring instrument – for example, to start and stop a series of measurements (timed mean calculation).
Attach the testo 440 air velocity and IAQ measuring instrument to metal surfaces (e.g. ducts) easily using the practical magnets.
Benefit from fast calculation of the volume flow: in the “volume flow” measurement menu of the multifunction measuring instrument, configure the dimensions and geometry of the duct cross-section – the measuring instrument shows you the volume flow straight away.
you will even find it easy to carry out measurements in particularly large ducts. This is because the extendable telescope on the hot wire and vane probe (Ø 16 mm) with universal handle can be further extended using the telescope extension – enabling you to attain a total length of 2 metres.
Carry out measurements at air/ceiling outlets effortlessly and without using a ladder. Fit your vane probe (Ø 100 mm) with the telescope with 90° angle and, if necessary, with the telescope extension (both can be ordered separately).
Greater freedom thanks to Bluetooth: the air velocity probes with Bluetooth have no inconvenient cable connection to the measuring instrument, and they transmit readings up to a distance of 20 m. Press the button on the probe to operate the measuring instrument – for example, to start and stop a series of measurements (timed mean calculation).
Attach the testo 440 air velocity and IAQ measuring instrument to metal surfaces (e.g. ducts) easily using the practical magnets.
Benefit from fast calculation of the volume flow: in the “volume flow” measurement menu of the multifunction measuring instrument, configure the dimensions and geometry of the duct cross-section – the measuring instrument shows you the volume flow straight away.
Range of probes for cleanrooms and laboratories
The testo 440 air velocity & IAQ measuring instrument is also ideal for a wide variety of applications in cleanrooms and laboratories in conjunction with the following probes:
- High-precision flow measurement in fume cupboards with the fume cupboard probe
- Thanks to the low start-up speed of 0.1 m/s, the high-precision vane probe (Ø 100 mm) is ideal for laminar flow measurements in cleanrooms. It is available as a variant with Bluetooth or with fixed cable
- To measure the humidity in cleanrooms, we recommend the high-precision humidity/temperature probe (0636 9771 or 0636 9772). With an accuracy of ±(0.6 %RH + 0.7% of m.v.) (0 to 90 %RH), it also meets the requirements for humidity measurements in this particularly sensitive area
- Use the high-precision digital Pt100 temperature probes, for example, for high-precision comparative measurements in calibration laboratories, temperature measurements in chemical laboratories or in the cosmetics industry as well as for determining the temperature distribution in refrigerators and conditioning cabinets
- see instruction manual for instructions on how to update your device
Accessoires
Sondekoppen
Transport en bescherming
accessoires voor meetinstrument
: 0554 1105
USB-voeding incl. kabel
USB-voeding incl. kabel
€ 45,00 € 54,45