Tenká ohybná sonda, ideálna pre meranie v malých objemoch, ako...

Obj.č  0602 0493

  • TC Type K temperature probe with flexible measuring tip, short response time and 2 m cable

  • Very fast temperature measurement in air, liquids, pastes and on surfaces

  • Measuring range: -200 to +1000 °C

Tenká ohybná sonda, ideálna pre meranie v malých objemoch, ako sú Petriho misky alebo pre povrchové meranie (fixácia s lepidlom), priemer 0.25mm, tč. typ K, trieda 1, Tmax 1000 ° C

Popis výrobku

This thermocouple (TC) temperature probe with flexible, low-mass tip is suitable for air temperature measurements and also for measurements in liquids and pastes - particularly in small-volume media, e.g. petri dishes. You can also carry out temperature measurements on surfaces if you fix the temperature probe in place at the measuring point, for example with adhesive tape.

Thanks to its very thin tip, which is 0.25 mm in diameter, the temperature probe has an exceptionally short response time of just 1 second. Therefore it is able to record very brief temperature peaks and is also suitable for air temperature measurements.

The temperature probe can record both very low and extremely high temperatures: -200 to +1000 °C. It has an oval (2.2 mm x 1.4 mm) FEP-insulated, 2 m long thermocouple cable. The thermocouple cable can be pushed through narrow openings such as slits in doors or refrigerator seals. It is heat-resistant up to +200 °C.

This Type K, Class 1 thermocouple probe has (within the measuring range -40 to +1000 °C) a standardized accuracy of ±1.5 °C or 0.004 x I t I (the higher value applies). This means that at a temperature of +500 °C, this probe has an accuracy of ±2 °C (since 0.004 x 500 °C = 2 °C).

The perfect probe for any application
Don't see the temperature probe you are looking for? Please contact us directly. We have a large range of standard temperature probes and we also manufacture customized probes specifically according to your personal requirements.

 

Rozsah dodávky

1 x exceptionally fast TC Type K temperature probe with large measuring range 0602 0493.
Typ K (NiCr-Ni)

Měřicí rozsah

-200 do +1000 °C

Přesnost

Třída 1 ¹⁾

Doba odezvy t99

1 s

1) Dle normy EN 60584-2 se vztahuje přesnost třídy 1 na -40...+1000 °C (typ K), třídy 2 na -40...+1200 °C (typ K), třídy 3 na -200...+40 °C (typ K). Jedna sonda odpovídá vždy pouze jedné třídě přesnosti.

Hlavní technická data

Rozměry

2,2 mm x 1,4 mm

Délka trubice sondy

500 mm

Délka kabelu

2 m

Průměr sondy

0,25 mm

Related Products

  • testo 175 T3 testo 175 T3
    testo 175 T3
  • testo 176 T3 Testo 176 T3
    testo 176 T3
  • testo 176 T4 testo 176T4
    testo 176 T4
  • testo 177-T4 Datenlogger testo 177 T4
    testo 177-T4
  • testo 440 testo 440 Air velocity and IAQ measuring instrument
    testo 440
  • testo 440 testo 440 Hot Wire Kit
    testo 440
  • testo 440 testo 440 16 mm Vane Kit
    testo 440
  • testo 440 testo 440 Lux Kit
    testo 440
  • testo 440 testo 440 100 mm Vane Kit with Bluetooth®
    testo 440
  • testo 440 testo 440 Humidity Kit with Bluetooth®
    testo 440
  • testo 440 testo 440 CO2 Kit with Bluetooth®
    testo 440
  • testo 440 testo 440 Air Flow ComboKit 2 with Bluetooth®
    testo 440
  • testo 440 testo 440 Indoor Comfort ComboKit with Bluetooth®
    testo 440
  • testo 440 Air Flow ComboKit 1 with Bluetooth® testo 440 Air Flow ComboKit 1 with Bluetooth®t 1 with Bluetooth
    testo 440 Air Flow ComboKit 1 with Bluetooth®
  • testo 440 dP testo 440 dP Air velocity and IAQ measuring instrument including differential pressure sensor
    testo 440 dP
  • testo 440 delta P testo 440 Delta P Air Flow ComboKit 1 with Bluetooth®
    testo 440 delta P
  • testo 440 delta P testo 440 Delta P Air Flow ComboKit 2 with Bluetooth®
    testo 440 delta P
  • testo 480 Testo 480
    testo 480
  • testo 735-1 testo 735-1
    testo 735-1
  • testo 735-2 testo 735-1
    testo 735-2