In building thermography, thermal imagers are ideal for quick, easy visualisation of energy losses in the heating or air conditioning systems of buildings. Comprehensive diagnosis can therefore be carried out to analyse energy efficiency, and structural improvement measures can be initiated. Detailed energy consultancy, where the whole building shell is analysed for its energy loss, effectively indicates further possibilities for energy saving.
Order-Nr. 0563 0875 V1
Ideally equipped for industrial and building thermography: The testo 875-1i thermal imager means even the smallest temperature differences can be seen with a thermal sensitivity of < 50 mK. You can create real images with the built-in digital camera and assign these to the thermal images.
Very good image quality: IR resolution 160 × 120 pixels, with SuperResolution Technology 320 × 240 pixels
Precise measurement: thermal sensitivity < 50 mK, high-quality 32° × 23° lens with manual focus, automatic hot/cold spot detection
Built-in digital camera creates a real image in parallel to the thermal image
Comprehensive accessories, including: robust case, pro software, SD card, carrying strap, mains unit and lots more
Order-Nr. 0563 0875 V2
With the testo 875-2i thermal camera, you can do your industrial and building thermography work even more easily and quickly: The built-in digital camera and voice recording via the headset make documentation and assignment of thermal and real images easier.
Very good image quality: IR resolution 160 × 120 pixels, with SuperResolution Technology 320 × 240 pixels
Thermal sensitivity < 50 mK, high-quality 32° × 23° lens, automatic hot/cold spot detection and optional temperature measurement up to +550 °C
Including a built-in digital camera and voice recording via a headset
Building thermography: Direct display of the risk of mould via traffic light colours
Order-Nr. 0563 0875 V3
Get your testo 875-2i professional thermal imaging camera and telelens set now and the accessories you need are only an arm’s length away!
testo 875-2i professional thermal imaging camera: thermal sensitivity < 50 mK, built-in digital camera with power LEDs, optional moisture measurements possible
9° x 7° telelens for the precise tracking of objects included in set
Extensive range of accessories included: rugged case, additional battery, quick charger, SD card, shoulder strap, lens cloth and much, much more
All the accessories you need just an arm’s length away
Order-Nr. 0563 0885 V2
Voltage installation inspections, high temperature measurements and circuit board analysis on the one hand. Solar panel system inspections, complete building envelope thermography and construction thermography for energy saving advice on the other. The testo 885 thermal imaging camera is excellently equipped for both professional industrial and building thermography.
testo 885 professional thermal imaging camera: resolution 320 x 240 pixels, optional SuperResolution enhanced to 640 x 480 pixels, thermal sensitivity < 30 mK
Optional high temperature measurements up to 1 200 °C
Panorama image function, SiteRecognition technology, humidity calculation, JPEG storage, optional: sequence storage in the unit and much, much more
Built-in digital camera, optional interchangeable lens, many added features, wide range of accessories included in delivery (carry case, SD card, pro software etc.)
Order-Nr. 0563 0885 V3
The testo 885 thermography kit with matching telephoto and wide range of accessories for professional industrial and building thermography and energy advice.
testo 885 professional thermal imager: resolution 320 x 240 pixels, optional SuperResolution enhanced to 640 x 480 pixels, thermal sensitivity < 30 mK
11° x 9° telephoto for precise measuring of far-off objects
Panorama image function, SiteRecognition technology, humidity calculation, JPEG storage, optional: sequence storage in camera and much more
All your accessories at your fingertips: rugged carry case, lens pouch, additional battery, quick charger, SD card etc.
Order-Nr. 0563 6352
The testo 635-2 temperature and moisture meter allows you to carry out temperature and moisture measurements on a variety of different materials, surfaces and environments. This is made possible due to leading-edge technology and a wide selection of optionally available sensors.
Optionally available sensors for moisture, temperature, pressure dew point and absolute pressure measurements
2 plug-in sensors and 3 wireless sensors can be connected
Super-size memory for up to 10 000 readings
USB cable and PC software for archiving and logging measuring data included
Order-Nr. 0560 6351
The testo 635-1 temperature and humidity measuring instrument enables you to measure the temperature, air humidity and dew point – in compressed air as well. State-of-the-art technology and a large selection of probes, which are available as an option, enable this wide variety of measuring possibilities.
Probes available as an option mean you can measure air humidity, temperature, absolute pressure and dew point in compressed air
Two plug-in probes and 3 radio probes can be attached
Calculates dew point and dew point distance
Display of min., max. and mean values
Order-Nr. 0560 8721
The testo 872 thermal imager gives you the best possible support for your work in professional industrial and building thermography. Take thermal images quickly, reliably and smartly with the highest image quality, very good thermal sensitivity and innovative functions. The case supplied with the thermal imager means it can be conveniently transported, so it is always there for you when needed.
Highest image quality: IR resolution of 320 x 240 pixels, via integrated testo SuperResolution Technology 640 x 480 pixels
Precise measurement: thermal sensitivity of 0.06°C
Smart and wireless: use your mobile device with the free testo Thermography App and wirelessly transmit readings from the testo 770-3 clamp meter and the testo 605i humidity measuring instrument (both available separately)
Innovative functions, such as testo ScaleAssist and testo ɛ-Assist for comparable, error-free thermal images
Order-Nr. 0560 8712
The testo 871 thermal imager combines high infrared resolution with professional measuring performance and easy handling. Its high-quality pixel detector, an integrated digital camera and, last but not least, the innovative functions are the features that impress. The testo Thermography App enables the testo 871 to offer smart thermography to meet professional requirements in industry and trade. The case supplied with the thermal imager means it can be conveniently transported, so it is always there for you when needed.
Very good image quality: IR resolution of 240 x 180 pixels, via integrated testo SuperResolution Technology 480 x 360 pixels
Smart: the free testo Thermography App enables you to write and send reports on site, as well as saving them online, and lots more.
Wireless networking: wireless transmission of readings from the testo 770-3 clamp meter and the testo 605i thermohygrometer (both available separately)
Innovative functions, such as testo ScaleAssist and testo ɛ-Assist for comparable, error-free thermal images
Order-Nr. 0554 7806
With the patent-pending SuperResolution upgrade, you can capture extremely high-resolution infrared images (up to megapixel quality) with your Testo thermal imager. The SuperResolution upgrade improves the usable geometric resolution of the thermal image by a factor of 1.6 – with four times as many measuring values.
More accuracy and security in every measurement
More detailed thermal images with four times more measurement values
Real temperature measurement values – no artificial intermediate values
Easy upgrade of your Testo thermal imager via internet
Order-Nr. 0554 8802
Additional lithium ion rechargeable battery for extending the operating time
Order-Nr. 0554 8801
Desktop charging station for two rechargeable batteries for the optimization of charging time
Order-Nr. 0554 8805
Special Germanium protective glass for optimum protection of the lens from dust and scratching