- Home
- testo 300 NEXT LEVEL kit 2 with printer
testo 300 NEXT LEVEL kit 2 with printer - Flue gas analyzer (O2, CO up to 4,000 ppm)
0564 3002 71
testo 300 NEXT LEVEL kit 2 with printer - Flue gas analyzer (O2, CO up to 4,000 ppm)
0564 3002 71Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display
Efficient, wireless parallel measurement of up to four testo Smart Probes simultaneously
Large 5-inch HD display – see all the system's measuring values at a glance
In the kit: testo 300 NEXT LEVEL flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, testo Bluetooth® Connector, spare dirt filters, testo Bluetooth® printer, spare thermal paper, EasyHeat software, instrument case
With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 NEXT LEVEL flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, testo Bluetooth® Connector, testo Bluetooth® printer, instrument case and practical accessories.
- testo 300 NEXT LEVEL flue gas analyzer with O2 and CO sensor up to 4,000 ppm (0633 3002 70)
- USB mains unit, including cable (0554 1106)
- Compact basic flue gas probe, 180 mm, Ø 6 mm, Tmax. 500°C; 1.5 m hose; including dirt filters and cone for fixing (0600 9740)
- testo Bluetooth® Connector (0554 3004)
- Spare dirt filters, compact probe; 10 off (0554 0040)
- BLUETOOTH®/IRDA printer, including 1 roll of thermal paper and rechargeable battery (0554 0621)
- Spare thermal paper for printer, indelible ink (0554 0568)
- Free download EasyHeat PC software (0554 3332)
- Instrument bag (0516 3001)
The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. It combines decades of experience in measuring technology with contemporary smart-touch operation, robust construction and e-mailing of reports. The testo 300 enables easy measurement of flue gas, draught, pressure, ambient CO and differential temperature.
Flue gas path and temperature channel can be connected to the instrument via a bayonet lock
Spare particle filter, compact probe; 10 off
Mobile BLUETOOTH®/IRDA printer
Spare thermal paper for printer, permanent
Free download: testo EasyHeat PC software
Temperature - TC Type K (NiCr-Ni)
| Measuring range | -40 to +1200 °C |
|---|---|
| Accuracy | ±0,5 % of mv (Remaining Range) ±0,5 °C (0,0 to +100,0 °C) |
| Resolution | 0,1 °C (-40 to +999,9 °C) 1 °C (Remaining Range) |
Differential Pressure - Piezoresistive
| Measuring range | -100 to +200 hPa |
|---|---|
| Accuracy | ±1,5 % of mv (+100,1 to +200 hPa) ±0,5 hPa (0 to +50,0 hPa) ±1 % of mv (+50,1 to +100,0 hPa) |
| Resolution | 0,01 hPa |
Flue gas O₂
| Measuring range | 0 to 21 Vol.% |
|---|---|
| Accuracy | ±0,2 Vol.% |
| Resolution | 0,1 Vol.% |
Differential Pressure flue gas Draught - Piezoresistive
| Measuring range | -9,99 to +40 hPa |
|---|---|
| Accuracy | ±1,5 % of mv (3,01 to +40 hPa) ±0,02 hPa (+0,1 to +3,00 hPa) ±0,005 hPa (+0 to +0,1 hPa) |
| Resolution | 0,001 hPa (0 to 0,1 hPa) 0,01 hPa (Remaining Range) |
Flue gas degree of effectivity, Eta (calculated)
| Measuring range | 0 to 120 % |
|---|---|
| Resolution | 0,1 % |
Flue gas loss (calculated)
| Measuring range | 0 to 99,9 % |
|---|---|
| Resolution | 0,1 % |
Flue gas CO₂ calculation (calculated from O₂)
| Measuring range | Display range 0 to CO₂ max |
|---|---|
| Accuracy | ±0,2 Vol.% |
| Resolution | 0,1 Vol.% |
Flue gas CO (without H₂-compensation)
| Measuring range | 0 to 4000 ppm |
|---|---|
| Accuracy | ±5 % of mv (401 to 2000 ppm) ±10 % of mv (2001 to 4000 ppm) ±20 ppm (0 to 400 ppm) |
| Resolution | 1 ppm |
Ambient CO
| Measuring range | 0 to 2000 ppm |
|---|---|
| Accuracy | ±10 % of mv (101 to 2000 ppm) ±10 ppm (0 to 100 ppm) |
| Resolution | 1 ppm |
General technical data
| Operating humidity | 15 to 90 %RH non-condensing |
|---|---|
| Weight | approximately 800 g |
| Dimensions | 244 (including probe connection) x 98 x 59 mm (LxWxH) |
| Operating temperature | -5 to +45 °C |
| Protection class | IP40 |
| Product colour | black/orange |
| Display type | 5.0" touch display, HD 1280*720 pixels, IPS (160 k) |
| Power supply | Rechargeable battery, USB mains unit |
| Warranty conditions | https://www.testo.com/guarantee |
| Authorizations | TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3 |
| Guarantee | Gas sensors (O₂, CO) 24 months; rechargeable battery: 12 months; Thermocouple 12 months |
| Memory | 1 000 000 measuring values |
| Battery life | 10 h |
| Storage battery type | Lithium ion battery |
| Storage temperature | -20 to +50 °C |
| Charging temperature | 0 to +45 °C |
Differential Pressure 4 Pa measurement - Piezoresistive
| Measuring Range | -50 to +50 Pa |
|---|---|
| Accuracy | ±0.3 Pa (< 10 Pa) ±3 % of mv (Remaining Range) |
| Resolution | 0.1 Pa |
General technical data
| Diameter probe shaft | 6 mm |
|---|---|
| Cable length | 1,5 m |
| Length probe shaft | 180 mm |
| Product colour | Black |
| Temperature maximum | 500 °C |
| Diameter | 6 mm |
| Weight | 346 g |
General technical data
| Storage temperature | -20 to +50 °C Rechargeable battery storage temperature: ±0 to +35 °C |
|---|---|
| Weight | approximately 400 g (including rechargeable battery pack, paper roll, mains unit) |
| Dimensions | 150 x 80 x 41 mm (LxWxH) |
| Operating temperature | 0 to +50 °C |
| EU-/EG-guidelines | RED: 2014/53/EU |
| Alarm function | via LED |
| Battery type | Lithium-Ion rechargeable battery pack, 3500 mAh, 3.7 V |
| Warranty conditions | https://www.testo.com/guarantee |
| Interface | USB; NFC |
| Battery charging time | 6 - 8,5 h |
| Battery life | > 6 h (20 °C / 68 °F) |
| Interface printer | Bluetooth® / IRDA |
| Print speed | 30 mm/s |
General technical data
| Dimensions | 120 x 75 x 60 mm |
|---|---|
| Product-/housing material | paper |
| Product colour | white |
| Weight | 50 g |
General technical data
| System requirements | Windows® 7; Windows® 8; Windows® 10 |
|---|---|
CO probes
CO probes
CO probe (digital), wired: for measuring carbon monoxide in indoor areas (e.g. boiler rooms) – measuring range 0 to 500 ppm
:
0632 1272
0632 1272
Flue gas probes
Flue gas probes
Easy probe shaft replacement via quick-change click system
:
0600 9760
0600 9760
Flue gas probes
Easy probe shaft replacement via quick-change click system
:
0600 9761
0600 9761
Flue gas probes
Modular flue gas probe with 180 mm long probe shaft, cone, integrated thermocouple up to 500°C and quick-change click system
:
0600 9762
0600 9762
Flue gas probes
Modular flue gas probe with 300 mm long probe shaft, cone, integrated thermocouple up to 500°C and quick-change click system
:
0600 9763
0600 9763
Flue gas probes
Flue gas path and temperature channel can be connected to the instrument via a bayonet lock
:
0600 9740
0600 9740
Flue gas probes
Flue gas path, draught path and temperature probe can be connected via a single probe coupling
:
0600 9741
0600 9741
Further probes
Further probes
Detection of leaks and blockages in the dual wall clearance
:
0632 1260
0632 1260
Further probes
Solid fuel kit - including probe shaft and adapter
:
0600 9765
0600 9765
Temperature probes
Temperature probes
Clamp probe (NTC temperature sensor) for measuring the surface temperature of pipes (Ø 6-35 mm) – measuring range -40 to +125 °C
:
0615 5505
0615 5505
Temperature probes
Pipe wrap probe (NTC temperature sensor) for measuring the surface temperature of pipes (Ø 5-65 mm) – measuring range -60 to +130 °C
:
0615 5605
0615 5605
Temperature probes
Waterproof immersion/penetration probe (NTC temperature sensor) for temperature measurements in liquids and semi-solid media – measuring range -50 to +150 °C, accuracy ±0.2 °C (-25 to +74.9 °C)
:
0615 1212
0615 1212
Sets
Sets
testo 300 NEXT LEVEL kit 2 with printer: Flue gas analyzer (O2, CO up to 4,000 ppm)
:
0564 3002 71
0564 3002 71
Sets
testo 300 kit 1: Flue gas analyzer (O2, CO up to 4,000 ppm)
:
0564 3002 70
0564 3002 70
Accessories
Accessories
Smoke tester with oil and soot sheet, for measuring soot in flue gas
:
0554 0307
0554 0307
Accessories
Free download: testo EasyHeat PC software
:
0554 3332
0554 3332
Accessories
Instrument case (height: 130 mm) - for instrument, probes and accessories
:
0516 3300
0516 3300
Accessories
Instrument case with double base (height: 180 mm) - for instrument, probes and accessories
:
0516 3301
0516 3301
Accessories
Hose connection set for separate gas pressure measurement testo 300, testo 330 LL and testo 320
:
0554 1203
0554 1203
Accessories
Pressure set for testing gas line testo 330-1/-2 LL version 2010
:
0554 1213
0554 1213
Accessories
testo 318 - Endoscope
:
0563 3185
0563 3185
Accessories
Mobile BLUETOOTH®/IRDA printer
:
0554 0622
0554 0622
Flue gas measurement on heating systems
Ideal for measurements involving heating systems:
- high-quality sensors, smart-touch operation, clearly structured measurement menus, creation of documentation on site, e-mailing of reports, large HD display, robust housing
- gas flow pressure measurement*, gas pipe test*, differential temperature measurement (flow and return temperature on heating systems)*, ambient CO measurement*, flue draught measurement on heating systems*
- Brochure testo 300(pdf, 8.42 MB)
- Data sheet testo 300(pdf, 3.03 MB)
- Datasheet Mobile BLUETOOTH®-/ IRDA printer(pdf, 278.0 kB)
- EU declaration of conformity testo 300(pdf, 33.98 kB)
- Instruction manual testo 300(pdf, 3.42 MB)
- Approval and Certification testo 300(pdf, 223.68 kB)
- Testo Information Safety. Environment. Cleaning. Storage(pdf, 178.65 kB)
- Quickstart testo 300(pdf, 1.2 MB)
- Instruction manual Mobile BLUETOOTH®/IRDA Printer(pdf, 1.2 MB)
- Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
- Firmware / App testo 300(FW 1.10.8784, BTG 0.3.8, APP 12.7.31.20326, 43.94 MB)
- Instruction manual EasyHeat software(pdf, 3.55 MB)