badenovaWÄRMEPLUS GmbH & Co. KG is a wholly owned subsidiary of badenova AG & Co. KG. Since 2007, the Freiburg-based energy service provider has been building and operating heating networks and plants in southwestern Germany together with several subsidiaries. This includes heat generation and cogeneration plants, photovoltaic, biogas and wind power plants, as well as heating networks whose total network length exceeds 120 km.
At its headquarters in Freiburg, badenovaWÄRMEPLUS employs 95 people. Of these, 11 are involved in the maintenance and servicing of the equipment under their care. This is because the energy service provider's job does not end with the commissioning of a plant, but only begins there. After energy concept creation, planning, construction and installation of the plant, badenovaWÄRMEPLUS takes care of regular operation and maintenance, as well as operational optimisation in order to operate plants in an energy-efficient manner and to prevent operational malfunctions.
badenovaWÄRMEPLUS GmbH & Co. KG was founded in 2007 in Freiburg im Breisgau. With the support of several subsidiaries, the energy service provider builds and operates heating networks and plants in the area between the Upper Rhine and the Northern Black Forest. The "Plus" in the company's name stands for "new ways", i.e. the switch from traditional heat supply to the use of renewable energies, but also for "more partnership" in the energy transition and supply.
The partnership relationship is demonstrated in particular by accompanying the customers even after commissioning in the maintenance and servicing of the plants as well as in the optimisation of operations. The team of Mr. Christian Schächtele, who is responsible for coordinating the maintenance and operation of the plants, has been using the testo 883 thermal imaging camera since 2021.
When maintaining the various systems, Mr. Schächtele and his team use the testo 883 thermal imager to detect thermal irregularities at an early stage, prevent malfunctions and ensure efficient operation of the systems.
The testo 883 must be versatile in this respect, as each type of plant has very individual requirements for the measurement task, which poses various challenges for the measurement technology:
For example, the Testo thermal imager, which was launched in January 2021, supports the badenovaWÄRMEPLUS team in the maintenance of thermal systems and the thermographic inspection of up to 600 control cabinets and components.
In the medium-voltage range, Mr. Schächtele and his colleagues use the infrared imager to thermographically monitor transformers and associated switchgear and to assess heating conditions. The challenge here is the increased safety distance that must be maintained for medium-voltage systems.
Even in the regular inspection of photovoltaic systems, which are thermographed over a large area to locate temperature hotspots on the modules, the distance from the riser (e.g. roof access) to the modules plays an important role in the measurement for condition assessment. In addition, the measurement takes place outdoors, i.e. under very bright ambient conditions, which requires a good display quality as well as corresponding contrast adjustment options on the thermal imager.
In addition, inverters are tested for defective components and thermographic inspections of lines and components of the heat coupling systems are carried out on a regular basis. Especially in (combined) heat and power plants, the measurement takes place in a rather warm indoor environment. During thermographic measurement, Mr. Schächtele's team is thus faced with the challenge of setting the best possible contrast in order to produce a meaningful thermal image.
The testo 883 set includes both the standard lens and an exchangeable telephoto lens. The two lenses make it possible to cope with very different measurement environments. Mr. Schächtele and his team also appreciate the intuitive operation and long battery life of the testo 883 as features that are convincing in everyday work.
When checking PV systems for so-called temperature hotspots, the badenovaWÄRMEPLUS maintenance team uses the standard lens (30° x 23°) or the telephoto lens (12° x 9°), depending on the location.
The telephoto lens is suitable for bridging the usually greater distance between the thermal imaging camera and the modules. The integrated laser marker facilitates the alignment of the thermal imaging camera to the respective measuring point.
Thanks to the display quality of the testo 883 thermal imaging camera, measured values and results can be seen perfectly even on sunny days under very bright ambient conditions.
Mr. Schächtele also uses various lenses and the laser marker for measurements on combined heat and power plants in order to target the object from a safe distance. Due to the NETD of 40mK on the testo 883 thermal imaging camera, thermal anomalies can be reliably detected.
The camera also stands out with its easy-to-grip design and convenient operation via touch display and joystick. The user-defined function button, which can be freely assigned, is used by the specialists of badenovaWÄRMEPLUS to switch to their frequently used measurement settings. This button can also be used to perform a range of different fuctions aside from this. In addition to this, the testo 883 offers testo SiteRecognition technology, which handles measuring location recognition, as well as storage and management of thermal images resulting from inspections.
testo 883 thermal imaging camera combines all advantages for top performance.
Best image quality: IR resolution of 320 x 240 pixels (with SuperResolution 640 x 480 pixels)
testo SiteRecognition: intelligent measurement site recognition and automatic image management
Easy generation of Testo codes manually or by importing existing inventory lists. Alternatively: Use of existing codes (QR codes, barcodes, datamatrix 128)
Export of measurement results into third-party programmes
Specific pre-settings for the respective measurement site, such as coloured marking of affected areas in the thermal image when permitted upper or lower limit values are exceeded
Extensive analysis and documentation with testo IRSoft software
Manual focus and interchangeable lenses
Wireless transmission of additional measured values directly into the thermal image; e.g. measured values of the clamp meter testo 770-3